|
#1
|
|||
|
|||
oil ratio
What is the correct oil/gas ratio for a 91 70 hp. Mercury outboard. The boat belongs to a friend that just bought it from a mechanic who told him to put double the normal amount of oil for the first tank and 1.5 times the amount on the second tank during break in period.
|
#2
|
|||
|
|||
Re: oil ratio
If the oil injection is hooked up you'll need to pre-mix 50:1. I'd run it that way for a 20 hrs or so, won't hurt anything other than fowl the plugs if you idle for extended periods.
|
#3
|
|||
|
|||
Re: oil ratio
Normal 50/1 as mentioned if oil injected judt put another 50/1 in the tank - if not then run it at 25/1 premixed
__________________
Any way you measure it - dumbass is expensive |
#4
|
|||
|
|||
Re: oil ratio
I told him to add 50 oz. to 10 gals for the first go round.That should be close enough don't you think ?
|
#5
|
|||
|
|||
Re: oil ratio
The motor ie not an oil injected model
|
#6
|
|||
|
|||
Re: oil ratio
If the motor is not oil injected you need to run 25:1 initially eg. 1 gallon of oil added to 25 gallons of gas for at least the first 10 hours, I'd go 20 hrs and lean it up after that.
|
Thread Tools | Search this Thread |
Display Modes | |
|
|