Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Repairs/Mods.

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 03-09-2012, 09:40 PM
gregorymacc gregorymacc is offline
Junior Member
 
Join Date: Jan 2012
Posts: 17
Default non seacraft deck

I have a non mako project. I am replacing the forward deck on my 1993 27' Ocean Master. I have got most of the wet wood out. There was no rot in the deck. http://im1.shutterfly.com/media/47a2...D550/ry%3D400/. I cut the top skin off and plan on reusing and then painting the old nonskid wit kiwi grip. I have left about a 2" lip where the sides radius into the deck. I am going to grind this down then use 6oz tape to tab the deck in. http://im1.shutterfly.com/media/47a2...D550/ry%3D400/ Is there any tool or suggestion to get the remaining wood from the deck? I plan on using divinycell H-60 for the deck. I am using vinylester resin for this project. on a side note how do I post pictures?
Reply With Quote
  #2  
Old 03-12-2012, 12:24 PM
fdheld34 fdheld34 is offline
Senior Member
 
Join Date: Feb 2008
Location: Port St Lucie, FL
Posts: 898
Default

here you go..just save pics to desktop and then go down to manage attachments/browse/upload
Attached Images
  
Reply With Quote
  #3  
Old 03-12-2012, 05:25 PM
Blue_Heron Blue_Heron is offline
Senior Member
 
Join Date: Jan 2006
Location: Gator Country
Posts: 1,416
Default

From mrobertson's thread in this forum:



Quote:
Originally Posted by mrobertson View Post

...Here's a tip if you ever do a floor the way i'm doing this one. Go to harbor freight and spend $15 and pick up one of these :





I chiseled out the wood in the boat by hand the old fashioned way, with a hammer and chisel. I had enough of hitting myself in the hand with the hammer so after some research i came up with the air chisel. I still had to remove the wood from the top skins i cut up out of the boat and it worked like a dream. Quick and easy :







-Mike
__________________
Blue Heron Boat Works
Reinventing the wheel, one spoke at a time.
Reply With Quote
  #4  
Old 03-17-2012, 07:53 AM
gregorymacc gregorymacc is offline
Junior Member
 
Join Date: Jan 2012
Posts: 17
Default

Few more updates of the work I have been doing. The entire forward deck is up and out. and I have ground down the topside skin. I am going to recore with divinycell h-60 then lay the old glass back on top.





I plan on tabbing the deck back in with a couple layers of 6oz tape. I only have about a 2" lip to work with then the deck transitions to the inside radius up the sides.

Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:29 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft