Cushion fabrication

[CHANCE1234]

Anyone do this or know someone who does? Working on a leaning post and need a cushion made for it. 32" wide, 8" on top, and 7 1/4" in the front.

[Old'sCool]

Look around online as some of those are standard.

[Sullivan21]

You can find similar cushions on ebay via greatlakessipper.com many times depending on stock, otherwise a local upholster shop can make them, I am actually having my LP cushion and rocket launcher back rest cushion custom made. I bought the vinyl off ebay it was about $40-60 for a 5 yard roll of white ribbed and a black vinyl.

[CHANCE1234]

I was quoted at almost $300 bucks for a 32 inch cushion. I don't friggin think so. Still need to see what others say, but that sounded way to high and not as nice lookin as I would have thought for $300. Ive been loking for some custom places, tomorrow I'll see if one in Falmouth is open.

[Mikem8560]

Originally Posted by CHANCE1234

I was quoted at almost $300 bucks for a 32 inch cushion. I don't friggin think so. Still need to see what others say, but that sounded way to high and not as nice lookin as I would have thought for $300. Ive been loking for some custom places, tomorrow I'll see if one in Falmouth is open.

you got $100- 125 in material cost wholesale plus 2-3 hours labor 300 is not unreasonable

[CHANCE1234]

Originally Posted by Mikem8560

you got $100- 125 in material cost wholesale plus 2-3 hours labor 300 is not unreasonable

That's what I'm realizing as the quotes roll in. I can buy a brand new leaning post for $500. But a cushion alone is between 280-330 so far.

[Miles Offshore]

The viynal (sp) is not what cost so much as the foam which is expensive as hell. At least it is retail. Thats why i dont mess with marine upholstery. The Cushions are not difficult to make at all.