Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 06-10-2016, 07:02 PM
Humpinit Humpinit is offline
Recovered
 
Join Date: Jun 2016
Posts: 15
Default Looking at 23' WA need advice. Newbie also

Hello all I'm new here but not new to the boating world. I need some advice on a boat that I am looking at. Here is some history.
1988 23' walk around with a 225 mercury.
My buddy bought the bought from a guy in South Georgia a couple years back and never used once.

He had the boat surveyed and everything came back as all good. He started to clean it up but lost interest. This is typical of him and his dad. My current motor came from him at a third of the cost of a new motor. He let it sit in the crate in his garage for 6 years before I bought it with zero hours.

But it has two small soft spots under the seats in front of the console. The raised deck area.

Is this a common problem and an easy fix?

I assume it's from stress over the years and maybe leakage through the bolt holes.

Can I add hatches in the face of the raised deck area and do the repost from there?
Reply With Quote
  #2  
Old 06-10-2016, 07:05 PM
Humpinit Humpinit is offline
Recovered
 
Join Date: Jun 2016
Posts: 15
Default

http://www.thehulltruth.com/boats-sa...und-cuddy.html

That's the link to the boat he bought and I am now looking at.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:51 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft