Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Repairs/Mods.
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 01-03-2004, 12:59 PM
GetReel GetReel is offline
Senior Member
 
Join Date: Jan 2003
Location: NJ
Posts: 198
Default Inboard hydraulic steering setup

Have any of you IB guys replaced or upgraded your Hydraulic steering system recently? If so, please share any specs. or components that you used. West Marine has a "package" system, but not cheap and a 20% re-stocking fee to return if it doesn't do the trick... There are so many different combinations it's makin my head spin.... [img]images/icons/confused.gif[/img]
Reply With Quote
  #2  
Old 01-05-2004, 01:01 AM
jw jw is offline
Senior Member
 
Join Date: May 2002
Location: Annapolis, MD--Ocean City,MD
Posts: 125
Default Re: Inboard hydraulic steering setup

Jeff,
I would check out Hynautics web site or teleflex Seastar website for the info. I have had Hynautics on my big rig for 33 years, they even sold me replacement parts at cost because my origianal parts were obsolete.

justr my 25cents worth
JW
__________________
www.bansheecharters.com

Wishn' I was Fishn"!!!!
Reply With Quote
  #3  
Old 01-06-2004, 01:43 AM
sebaugh sebaugh is offline
Junior Member
 
Join Date: Apr 2003
Location: Ocean City, MD
Posts: 10
Default Re: Inboard hydraulic steering setup

I replaced my steering (20' CC) with a Hynautics system. I belive it is undersized and does not perform as well as it should. That being said, the biggest thing I overlooked was the tubing setup. Instead of having a fixed piston and 2 fixed lines to it, the piston moves side to side as the wheel is turned. Each end has a line going into it which means I need extra tubing to allow for play (similar to the control cables). I would make sure whatever setup you go with that is ample sized for the motor and that the piston stays in a fixed position allowing for fixed length tubing.
Reply With Quote
  #4  
Old 01-05-2004, 02:08 PM
GetReel GetReel is offline
Senior Member
 
Join Date: Jan 2003
Location: NJ
Posts: 198
Default Re: Inboard hydraulic steering setup

Thanks for the feedback. I've been on line checking this out. Looks like a Sea Star system so far. I'd love an auto pilot...so double the budget...
Reply With Quote
  #5  
Old 01-05-2004, 09:19 PM
Miles Offshore Miles Offshore is offline
Senior Member
 
Join Date: Feb 2002
Location: Virginia Beach, Virginia
Posts: 1,260
Default Re: Inboard hydraulic steering setup

Hey Jeff, I put a seastar on mine last spring. Thats the project I made the mistake of measuring once and installing twice [img]images/icons/rolleyes.gif[/img] . Anyways I will have to find a boat-us catalog to tell you which set-up I used if you want to know. The hardest thing getting used to for me was the extra turn of the wheelI believe from 3 turns lock to lock to 4 turns. Its awesome though!!! Ill look at work tomorrow-
__________________
"Lifes too short to own an ugly boat"
Reply With Quote
  #6  
Old 01-06-2004, 05:26 PM
GetReel GetReel is offline
Senior Member
 
Join Date: Jan 2003
Location: NJ
Posts: 198
Default Re: Inboard hydraulic steering setup

Craig, thanks, if you can tell me which SeaStar cylinder you used it would help, I referenced Sea Star #1-HC5312, Model BA125-7ATM with 3/8" Nylon reinforced hose with SeaStar 1 Standard Helm...sound familiar???
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:48 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft