Spray Rails

[TUGBOAT]

Can You believe,She's almost finished !(Complete Restore)Been since LABOR Day.I'm primming Her now.Here's where I need some Help ?? Spray Rails.What Kind & where can I get them.
Now is the Time to do this.
NO TEAK !!I've taken it all off.
Also has anyone used wedges for the out board?
20' cc 1983 150 Merc.
Scream'n Reels,
Capt. Brad
(Going to Flint Michigan Mar. Any one have a Furrrr coat I can Borrow !! ?? Flip Flops for Me.

Frenzie Lures

[John R]

Captain Brad - let's get some pics - I have 9 inches of snow outside, NO new boats to check out on any of the main sales rags - I NEED A FIX, put up some pics please [img]images/icons/grin.gif[/img] - or e-mail themn to me and I'll post 'em for you [img]images/icons/smile.gif[/img]

There was a thread last spring about spray rails and a link... Here was one thread: http://www.classicseacraft.com/cgi-b...c;f=3;t=000049

do a search in each category for spray rail - there were several topics on this..

[TUGBOAT]

Thanks John,I e-mailed them , Might as well do it now,Just wondering if I should let the ol Girl cure before I stick it to Her !!Algrip , only the bottom has been painted,sides still primer.All I have is a few pics of Before.This Labor of love kinda started as a transom FIX.
Ended up pulling every screw/hardware/EVERYTHING off.Filled every hole(glass)including top to bottom under rubrail.
All new(toyz) electronics/gauges/Windshield.
Lets put it this way.Steering(hyd)/Throttle/Trim tabs are the only thing staying.
I've got a lot from here !
I rhino linered the sides under the gunnels !White,I'm gonna make rod holders closer in.
No carpet so no sand or caught hooks.Should be
easy to clean.Again Thanks
Scream'n Reels
"Tugboat"
Gotta Jacket ?? 83* yesterday/78* today lil rain cold snap.

[SEAFARI]

Capt. Brad- Sounds like a Master Angler? I
have the black carpet on my 78'. I would
like to see the rhino lined sides. When I
installed the Bennet M-80's, It got rid of
90% of the spray and the listing problems
in a quartering sea. Its interesting the
20 MA didn't change much after 79'. CSY
kept the Potter mold 19'8" on that model
only. The only change might be the console?

John- 9" of snow? I have about 3 feet at
my door and can't open it [img]images/icons/frown.gif[/img]

Chris

[Briguy]

I put a pair of spray rails on my 15 1/2 palm beach flates boat. Man oh man, it was a wet boat! Now it is about 80% dryer. I think its called the smartrail. Search using yahoo. It cost about $285.00 and took 2 hours to install. Let me tell you, they are NEVER coming off. I may end up putting them on my 23' sooner or later.

[TUGBOAT]

I bought the bennett 10's(inches),they said the 12's were better for the stearn heavy SeaCrafts.
Let Me Told YA Sumpt'n.Don't power push those Buttons !!!!!!!!!Touch 'em lightly.I have them going through a Master switch just in case I/?
accidently pushes one. 45* list in .5 seconds !!
Reminds Me of the ol' days evacuating drill platforms(oil Rigs) in the Hurricanes. I still get Wet.