Vinyl Gunnel Trim

Capt Chuck · #1 12-20-2003, 12:24 AM

Anyone know where I can obtain about 15' of the 1" vinyl (teak grain Look) gunnel trim from the late 70's CC models.

After mine had started to peel, I stripped it with acetone and then 2 part epoxy painted it to match. I will be enclosing my transom and want to continue the trim across the back. Thanks for any input. I will pay cost and shipping. [img]images/icons/cool.gif[/img]

Capt Chuck · #2 12-26-2003, 10:52 AM

I didn't get any hits on this post so I'm bringing it up again in hopes of some answers [img]images/icons/smile.gif[/img]

Capt Chuck · #3 05-13-2004, 08:18 AM

Bump

Rufridr069 · #4 05-13-2004, 08:33 AM

Is it the U channel type or an actual strip?

Capt Chuck · #5 05-13-2004, 12:08 PM

Hi Rich

It is a flat strip made of vinyl, not wood, plastic or metal. There is no lip or U to it. Originally it appeared to be adhered with double face tape and small s/s screws every few inches. I have not seen any other SeaCrafts where this material was used. I don't think it was an after-market deal

BTW: Did you check on the availability of the mono and monel line

Rufridr069 · #6 05-13-2004, 01:06 PM

check you PM's

TUGBOAT · #7 05-21-2004, 02:28 PM

Capt Chuck, I used a plain black vinyl trim ? Wood Grain ? I got some Mighty Rough sand paper ! It's not that $ under $2. a foot comes in 20' sections.has a small lip to catch under the gunnel.

Scream'n reels' [img]/images/graemlins/cool.gif[/img]

Capt Chuck · #8 11-05-2004, 01:47 PM

I'm bringing this thread up again in hopes that maybe one of the newer members in the last year has a line on the coaming trim piece that I can't find and I'm still needing. Please read / see pictures in the previous posts

In addition to the vinyl trim, I am looking for approx 8' of the 1 1/2" (some models had 2") original black rub rail...

If anyone has a line on these two items, please contact me,
Thanks Chuck

SEAFARI · #9 11-05-2004, 06:12 PM

Chuck,
Did you bring the boat in yet?
Dont forget to save those scraps
for me! Hmmm April, No wind=Mahi
Mahi [img]/images/graemlins/cool.gif[/img]

Capt Chuck · #10 11-05-2004, 11:02 PM

Chris

I'll be stripping parts off this week. The Transom / Bracket job starts next week. PM me with what pieces you want [img]/images/graemlins/wink.gif[/img]