|
|
|
|
#1
08-08-2005, 09:54 AM
|
|||
|
|||
Scuppers
My '78 23 Sc has these small 3/4" tubes for scuppers...they don't drain very well. Has anyone come up with a way to improve them? Or is this just something you have to live with....This is the only "flaw" in an otherwise awesome hull...
|
|
#2
08-08-2005, 03:36 PM
|
|||
|
|||
|
Re: Scuppers
Here is your answer.
http://forum.classicseacraft.com/sho...=&fpart=1&vc=1 FellowShip [img]/images/graemlins/grin.gif[/img]
|
|
#3
08-08-2005, 08:47 PM
|
|||
|
|||
|
Re: Scuppers
I'm amused by the beer thing...and it's a great idea that I'm sure works well. Fortunately, I don't have much problem with water coming in, it's just slow going out. I was trying to find someone who might have put larger scuppers in. I have a 21 Trophy (for sale) and it has four scuppers with the little rubber flap deal on the transom. A lot of Trophy owners pitched them in favor of the Rabud ball type. I heard someone say one time "you can judge a good offshore cockpit by the scuppers", for whatever thats worth. I think I am going to re-do the deck this winter (there are some cracks to fix) and put in larger scuppers. Maybe your Vortex in a larger diameter will be the answer....thanks for the idea...
|
|
#5
08-11-2005, 12:57 PM
|
||||
|
||||
|
Re: Scuppers
Jon
Go with the 2" Gemlux with the changeable flapper.They work fine on my 1978 23' [img]/images/graemlins/wink.gif[/img]  Click here for catalog site ----> Gemlux Scupper 
__________________
   1978 23' Superfish/Potter Bracket 250HP -------- as "Americans" you have the right to ...... "LIFE, LIBERTY and the PURSUIT of a Classic SeaCraft" -capt_chuck
|
|
#6
08-11-2005, 02:47 PM
|
|||
|
|||
|
Re: Scuppers
The ones in the above picture are very similar to the original ones installed on my 89 SeaCraft 23WA and they work great as long as you don't wash a big chunck of herring or other bait down them and it gets stuck. Easily cleaned out w/a hose though.
The Seasports are mfg's here in town and they have used the ping pong balls style for years and the seems to work well also. I would be tempted to install the 3/4 inch ones in my engine well to keep water from coming in the drain holes. The deck plate in the engine well is cracked and leakes like a sieve letting water get inside the hull sometimes. Not a real big problem, just a nuisance. Have a good day [img]/images/graemlins/laugh.gif[/img]
__________________
Gary
|
 |
|
|
Hybrid Mode
