QUESTION ON IMRON PAINT FINISH?

[MMikeB]

HELLO I HAVE A 73 TSUNAMI THAT I JUST PURCHASED THAT I THINK HAS AN IMRON FINISH, IT WAS DEFINATELY PAINTED. I WANT TO KNOW OF THE BEST STUFF TO SHINE IT UP. I HAVE ALREADY USED 3M COMPOUND WITH MY BUFFER AND IT LOOKS 100 TIMES BETTER. IS THERE ANYTHING ELSE THAT I CAN USE ? FIBERGLASSMAN HELP ME OUT HERE THIS IS YOU CUP OF TEA

[joseeli8797]

A product called 3m perfect-it 3 rubbing compound or same stuff in extra cut dont use a finishing glaze, finishing glaze is basicaly to work on clear coats or to bring out luster the average Joe will buy it and use it and it wont seen like its worth a cr!! it takes a diffrent kind of pad for buffing ( a foam pad )you will probobly burn the paint if you dont have a lot of experiance

[MMikeB]

THANKS FIBERGLASSMAN CAN ALWAYS COUNT ON YOU FOR SPONTANIOUS FEEDBACK, THIS 3M-PERFECT IT DO I PUT THIS ON BUY HAND OR CAN I USE MY MULTISPEED DEWALT BUFFER?

THANKS MIKE

[joseeli8797]

High speed buffer with a wool pad you have to constantly clean wool pad so it does not cake up and leave swirl marks

[MMikeB]

THANKS AGAIN FIBERGLASSMAN.

[wavelength]

I use Aqua Buff 2000 that I get from Young Boats and set the buffer at 800rpm with a wool pad.