Deck Repair, 1975 23 Inboard

[blunas2188]

I have noticed a few soft spots on my deck and was wondering if anyone had any advice to repairing these. Is there any way to make the repairs without it looking like the deck was attacked by a saw. I do not want to do a full deck repair, yet, and was hoping someone could help or point me towards a previous post about this topic. Thanks

[htillman]

Depending on the soft spots, you can drill a small hole through the gel coat and inject lightly thickened epoxy into the holes. Space them a few inches apart in the soft area and then repair the holes you drilled. It has worked for me in the past.