|
|
|
|
#1
10-27-2009, 11:15 AM
|
|||
|
|||
Suzuki 250 rigging question
I'm repowering my 23 Sceptre with a 250 Suzuki.I'm having the motor shipped up from Florida and forgot to measure the control cables on my old motor before I sold it.
Does anyone know what length cables I need? it has a dash mounted binnacle control w/transom mounted motor. Also what pitch Suzuki prop should I go with? I'm thinking 18.5 or 17
__________________
77 Sceptre 250 Suzuki 
|
|
#3
10-27-2009, 04:45 PM
|
|||
|
|||
|
Re: Suzuki 250 rigging question
Quote:
If you have a binnacle control instead of side-mount, add the distance of the control from the hull-side if the cables run under the gunwale. SO you would have A+B+4' plus distance from gunwale. If the cables run aft below the deck, add the distance from the hull side plus the binnacle height above the deck.
__________________
Common Sense is learning from your mistakes. Wisdom is learning from the other guy's mistakes. Fr. Frank says: Jesus liked fishing, too. He even walked on water to get to the boat! Currently without a SeaCraft  (2) Pompano 12' fishing kayaks '73 Cobia 18' prototype "Casting Skiff", 70hp Mercury
|
 |
|
|
Hybrid Mode
