20 seacraft cc project boat

woodie1 · #1 03-14-2010, 11:13 PM

I have a 1976? seafari project boat, hate to sell but have lost employment and dont have funds for finishing off, wife wants it gone! seafari cuddy has been surgically removed to convert to a center console. boat has a late model mercruiser 4.3 with a rebuilt alpha one gen 2 lower, unfortunately, manifolds were split due to freeze/thaw here in sunny maryland. boat ran fine last summer , decks are good and i have clear title , trailer is ok ,just old ,i just need it gone as i don,t have funds to finish. resonable offers above 1500.00? i will try to post pictures if not i can e-mail them to those interested FROM THIS SITE ONLY! NO EBAY SCAMMERS PLEASE, been there had it done to me!

Bushwacker · #2 03-16-2010, 01:02 AM

Do you have the windshield and cabin windows for it? I know some folks that might be interested in them!

chrisp0410 · #3 03-16-2010, 11:27 AM

Quote:

Do you have the windshield and cabin windows for it? I know some folks that might be interested in them!

Please let us know. I might be interested myself.

woodie1 · #4 03-16-2010, 11:58 PM

hey chris,
no got rid of the windows ,windshield and cabintop as it was laying around in the shop , sorry. how about i throw in a boat? LOL.just kiding.

woodie1 · #5 03-16-2010, 11:51 PM

hi buahwacker,
sorry took me a while to get back to you. no i dont have the windows , they laid around the shop for a few months , i didnt know what to do with them so they went to the dumpster, its a shame to because they were in good cond. didnt even think to put them on here sorry.

fdheld34 · #6 03-16-2010, 09:15 AM

If you would like email pictures to me at [email protected] and I will post on site for you under this classified topic
-Fred

DonV · #7 03-16-2010, 09:28 AM

Well....well....I see a Happy Birthday is in order today!!

Happy Birthday young man!!!!!!

woodie1 · #8 03-16-2010, 11:54 PM

hey fred,
i'll take you up on that soon as i take some pictures. she needs a little claen up as the winter here was a little snowy. thanks and i'll be in touch!

thunder · #9 03-29-2010, 09:13 PM

Where is she located? Has anything else been cut besides the top? How's the floor and transom?

woodie1 · #10 04-01-2010, 11:19 PM

Hey deeep thought,
Got up in her last week and started the motor,the manifolds are truely cracked but block is fine ,whew,anyway i am in process of fitting new manifolds and elbows. as i have stated , the deck openings forwrd had been glassed shut with just the "footwell" under the cuddy being converted to a cooler. the decks aft at fuel tank are good.
The only part cut on the boat was around the "bridge wings"
runnig aft and around the cuddy. the raised areas were fit with foam and professionally glassed , they just need fairing and gel coat or awlgip. the original gel coat on the whole boat is white. it has never been painted , i think some compound would make the sides shine up! if i get her up and running she could finished off with a little work. it's in annapolis ,md.