|
|
|
|
#1
05-10-2016, 05:51 AM
|
|||
|
|||
1985 23' Seacraft Sceptre Project
1985 Seacraft 23' Sceptre w/ twin 1985 140HP Evinrudes & aluminum trailer. Too many boats. I have acquired a 1976 Seacraft 23' Inboard and do not have the time to work on this project. Bennett trim tabs, Hynautic steering, solid floor, transom appears solid, original motors supposedly have good compression (haven't checked, but not locked up, needs carb work, was going to repower), needs new fuel intake. It had been sitting for a while when I picked it up. Needs a through cleaning, which I may try to do if time permits. Hull appears solid except for the front nose cap is soft where pulpit was mounted. $2000
Transaction ID: 44G28884TP5589040 
|
|
#3
05-10-2016, 11:38 AM
|
|||
|
|||
|
Update 1985 Seacraft
Sorry, the boat is located in Geneva, Fl. 32732, which is in Central Florida, about 20 miles northeast of Orlando.
|
|
#5
05-24-2016, 05:53 AM
|
|||
|
|||
|
Thank you to the members who have expressed interest. I'd like to make some room and start working on the inboard, so if your interested, let me know. I have another basically stock 1974 Seafari 4.3 Mercruiser I/O that I need to post also.
Thanks. Barry
|
|
#8
05-27-2016, 05:37 AM
|
|||
|
|||
|
Zutt, I've been communicating with a couple club members about the purchase, but the boat is still for sale. Had another inquiry from Hawaii, but that seems like a major undertaking to get it there.
|
|
#9
05-27-2016, 05:47 AM
|
|||
|
|||
|
Snookered / 77 SceptreOB,
The trailer is registered as a 1986 Magicloader. It actually trailered pretty straight behind the truck when I first towed it home, except for a couple bearing issues (bearings have been replaced). They are fairly narrow trailers, but will fit tight quarters.
|
 |
|
|
Hybrid Mode
