Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 04-04-2018, 08:08 PM
kmoose kmoose is offline
Senior Member
 
Join Date: Jul 2006
Location: Ocala, Florida
Posts: 1,817
Default Considering a Rhodan for the Tsunami

Trying to figure out if it is doable.... For bottom fishing offshore it would be awesome but I’m wondering how long a shaft I would have to get. I’m also not digging having to put 2 big deep cycle batteries midship but the thought of being able to hold on structure without dealing with traditional anchoring is very attractive. I would also have to get used to seeing the ugly thing on the bow but it does have a quick release system.
__________________
[b]The Moose is Loose !
Reply With Quote
  #2  
Old 04-04-2018, 08:28 PM
hobiekanobie hobiekanobie is offline
Member
 
Join Date: Nov 2012
Posts: 42
Default

Mount it on your transom? Or put it on a removable mount so you can deploy or stow away when needed? Do they not make trim tab mounted motors that you can Intergrate with this technology?
Reply With Quote
  #3  
Old 04-05-2018, 08:27 AM
Eric B Eric B is offline
Recovered
 
Join Date: May 2016
Posts: 214
Default

Hey Ken,

I have one on my flats boat. Can't say enough about it. The remote control makes the thing a breeze from anywhere on the boat. The quick release system is easy and only leaves a small 6x8 plate on the bow. I can measure the shaft length when I get home if you wish.
Reply With Quote
  #4  
Old 04-05-2018, 09:01 AM
manitunc manitunc is offline
Recovered
 
Join Date: Mar 2018
Posts: 124
Default

I have one on my 19'. I'm using a 72" 36v Terrova and it has plenty of reach even in sloppy seas. Best addition I have made. No more anchor issues. find your spot and stay there. or move over 5', or back 5' or whatever you want with a push of a button.
Attached Images
 
Reply With Quote
  #5  
Old 04-05-2018, 09:10 AM
DonV DonV is offline
Senior Member
 
Join Date: Jul 2004
Location: Apollo Beach or Islamorada
Posts: 3,488
Send a message via ICQ to DonV
Default

Hey Ken, not sure about mounting anywhere but the bow, these GPS controlled trolling motors are made for the boat to follow. If you were to put on the transom it would pull the boat stern first, not too sure about that. Plus with a 23'er you would need a 36 volt unit, 101 pounds of thrust. That being said I don't see why it would not be worth looking into. No reason it won't work on your boat, especially in calm water it would work quite well.
Reply With Quote
  #6  
Old 04-05-2018, 12:26 PM
kmoose kmoose is offline
Senior Member
 
Join Date: Jul 2006
Location: Ocala, Florida
Posts: 1,817
Default

Don, I just made a few calls and to do it right I would have to spend just shy of $5k for everything if I install it myself. Gonna take a lot of negotiating at home to get that done.
__________________
[b]The Moose is Loose !
Reply With Quote
  #7  
Old 04-05-2018, 01:36 PM
DonV DonV is offline
Senior Member
 
Join Date: Jul 2004
Location: Apollo Beach or Islamorada
Posts: 3,488
Send a message via ICQ to DonV
Default

Holy poop!!! $5k is way, way, way above my negotiating skills at this house for a GPS trolling motor!!!!!! I can't believe a GPS enabled Minn-Kota or Motorguide with extra long shaft, three AGM batteries, a bunch of #6 wire would be in that stratosphere!!!
Reply With Quote
  #8  
Old 04-06-2018, 11:11 AM
manitunc manitunc is offline
Recovered
 
Join Date: Mar 2018
Posts: 124
Default

Quote:
Originally Posted by DonV View Post
Holy poop!!! $5k is way, way, way above my negotiating skills at this house for a GPS trolling motor!!!!!! I can't believe a GPS enabled Minn-Kota or Motorguide with extra long shaft, three AGM batteries, a bunch of #6 wire would be in that stratosphere!!!
it wasnt for me. I picked up a new, unused 36v 72"Terrova for $1700, got 3 batteries for $300. Some wire and a few connectors and away we go.
Reply With Quote
  #9  
Old 04-06-2018, 01:04 PM
kmoose kmoose is offline
Senior Member
 
Join Date: Jul 2006
Location: Ocala, Florida
Posts: 1,817
Default

Quote:
Originally Posted by manitunc View Post
it wasnt for me. I picked up a new, unused 36v 72"Terrova for $1700, got 3 batteries for $300. Some wire and a few connectors and away we go.
I am looking at the 84" Rhodan, three Dekka gel batteries, a compatible charging controller that allows charging from the engine, wire and custom mounting and backing plate for the bow. To add additional injury I will likely go with LI batteries to save 45% of the weight.

There is also talk of a pocket mount version coming that can auto deploy straight down with nothing on the bow. I would absolutely be fine with making the hull modifications for that.
__________________
[b]The Moose is Loose !
Reply With Quote
  #10  
Old 04-06-2018, 01:13 PM
NoBones NoBones is offline
Pooh Bah
 
Join Date: Apr 2004
Location: Area 442 Somewhere in Florida
Posts: 3,699
Default

Ken it may be time to shuck the single 300 for triple 150's
Then install the Seastar virtual anchor...

Not sure if it will work on twins though....
__________________
See ya, Ken ©
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:36 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft