Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 02-25-2019, 06:39 PM
Topflitegraphics Topflitegraphics is offline
Recovered
 
Join Date: Mar 2018
Posts: 318
Default Dusky Bracket on a 20' MA?

Realized the other bracket I bought for my MA was not quite what I wanted so I sold it this weekend. So now I am in the market again and came across one on CL that is a Dusky Drive bracket. Will this work? Would it be beneficial to enclose the top for better flotation or does it not really matter other than if/when water comes over it?
Attached Images
  
Reply With Quote
  #2  
Old 02-25-2019, 09:07 PM
JohnC JohnC is offline
Senior Member
 
Join Date: Jul 2002
Location: Miami
Posts: 190
Default

I don't see why it wouldn't work. The open brackets look really heavy! I don't know if that matters to you but if so it may be worth checking. The folks at Dusky are pretty helpful if you call and ask a question.
Reply With Quote
  #3  
Old 02-26-2019, 08:44 AM
flyingfrizzle flyingfrizzle is offline
Senior Member
 
Join Date: Sep 2012
Location: Eastern NC
Posts: 1,653
Default

I had one and cut it up to make it more like a modern bracket with a swim platform on top of it. It was the twin outboard bracket so it had a ton of flotation but was very heavy. Seems like it was over 200lbs. I cut it down and got it to like 165lbs then added a swim platform to it. It did really well considering what it was. I picked it up for like a $100 or so that's why I went that route but probably wouldn't do it again. I have built my most recent brackets ground up from a mold and also one from aluminum plate. But to bolt one on and use it as is factory it will work well other than be a little heavy. The top open part has drain holes in it so that it will work like a self draining splash well. They are one of the strongest brackets you will ever buy though. I have a thread on here showing the conversion I done on my dusky bracket. There were some sections of glass almost 3/4" thick on it. Mine was balsa wood cored but the lay ups on the balsa were very thick. If you can get one super cheep I wouldn't feel bad about using it.
__________________
Current SeaCraft projects:
68 27' SeaCraft Race boat
71 20' SeaCraft CC sf
73 23' SeaCraft CC sf
74 20' SeaCraft Sceptre
74 20' SeaCraft CC sf
Reply With Quote
  #4  
Old 02-26-2019, 09:42 AM
Topflitegraphics Topflitegraphics is offline
Recovered
 
Join Date: Mar 2018
Posts: 318
Default

OK - good info. He is asking $800 so it is not what I would call super cheap but he is including the custom aluminum swim platforms with it. I figure a good number for it is closer to $500...
Reply With Quote
  #5  
Old 03-04-2019, 01:27 PM
Topflitegraphics Topflitegraphics is offline
Recovered
 
Join Date: Mar 2018
Posts: 318
Default

Day late and a dollar short - he sold it already. I guess I will keep looking...
Reply With Quote
  #6  
Old 03-05-2019, 08:08 AM
flyingfrizzle flyingfrizzle is offline
Senior Member
 
Join Date: Sep 2012
Location: Eastern NC
Posts: 1,653
Default

Might not of been "meant to be" you will probably find something you like better. Even though the dusky brackets have a good bit of floatation they are still heavy. Being it is on a 20' hull you will also be better off with something lighter if you can find one with flotation chamber on it.
__________________
Current SeaCraft projects:
68 27' SeaCraft Race boat
71 20' SeaCraft CC sf
73 23' SeaCraft CC sf
74 20' SeaCraft Sceptre
74 20' SeaCraft CC sf
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:58 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft