Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 09-21-2020, 05:11 PM
Johnlupo Johnlupo is offline
Recovered
 
Join Date: Jul 2020
Posts: 4
Default Max hp or weight on 18

Planning a repower this winter after we finish a complete Reno on a Classi 1976 18. Last step is to bring the transom up to 25 inches and paint. As expected My 17 yr old son is itching to put a four stroke 150Hp which weighs around 450. Based on what I’m reading I’m inclined to stay sub 400lbs and go with a 115hp. As always appreciate the feedback.
Reply With Quote
  #2  
Old 09-21-2020, 08:34 PM
Beaver Beaver is offline
Senior Member
 
Join Date: Nov 2011
Posts: 260
Default

One of the guys on here has a Suzuki DF 90 that pushes his 18 36 mph and gets 6.6 mpg.

I have a 90 2 stroke on my 75 and it tops out at 32 and gets 3.3 mpg.

I’d be really slow to put a 150 on an 18.
Reply With Quote
  #3  
Old 09-22-2020, 07:01 AM
uncleboo uncleboo is offline
Senior Member
 
Join Date: Sep 2009
Location: Edenton, NC
Posts: 1,583
Default

The new Suzuki 20" DF140 is 397 lbs. and I can get 40 mph out of it. Not sure on fuel consumption numbers, but, I can ride quite awhile on a tank. I raised my transom to 23" and have the motor mounted on the 2nd hole from the bottom putting the anti cav plate about 2-3/4" up from the keel. Sometimes I think it might do a pinch better lowered 1 more hole, but, it handles and performs fine. Running a 13-3/4 x 21p prop.
__________________
1975 SF18/ 2002 DF140
1972 15' MonArk/ 1972 Merc 50
http://i833.photobucket.com/albums/z...photos/SC3.jpg
Reply With Quote
  #4  
Old 09-26-2020, 11:34 AM
Fr. Frank Fr. Frank is offline
Senior Member
 
Join Date: Oct 2003
Location: Shalimar, Florida
Posts: 2,265
Default

My '87 18' has a 25" transom and my rating decal says max hp is 200 hp.
That said, I have an Etec 90 hp, and I get a WOT speed of 35 mph properly trimmed, and I get 6.8 mpg average, with my cruise speed being about 21-22 mph inshore, and about 18-20 mph offshore. Instead of trim tabs, I run with a Hydro-Shield under my prop.
__________________
Common Sense is learning from your mistakes. Wisdom is learning from the other guy's mistakes.

Fr. Frank says:
Jesus liked fishing, too. He even walked on water to get to the boat!

Currently without a SeaCraft
(2) Pompano 12' fishing kayaks
'73 Cobia 18' prototype "Casting Skiff", 70hp Mercury
Reply With Quote
  #5  
Old 10-05-2020, 06:37 PM
Samsdad57 Samsdad57 is offline
Recovered
 
Join Date: Jul 2018
Posts: 19
Default

My ‘87 18SF I bought new in Oct ‘87 has this capacity tag.
I put a Johnson 140 looper on it.
Attached Images
 
Reply With Quote
  #6  
Old 10-27-2020, 01:13 PM
BocaSeacraft BocaSeacraft is offline
Recovered
 
Join Date: Dec 2014
Posts: 26
Default

I had a 1975 18' SeaCraft which I repowered with a Suzuki DF90 back in 2015. I think they weigh 342 lbs. I did a lot of research before I made the purchase and was leery it wasn't going to be enough power for the boat. I originally had an old 1987 Evinrude 90 2-stroke on there. I had the original height transom, so I wanted to keep as much weight off the stern as possible. I moved the batteries under my console. I recently sold the boat, but was very very happy with my decision to go with that Suzuki 90. It jumped up on plane quickly and had enough torque to spin a 14x16 prop. I had a great cruise speed in the low 20's and a top end around 35-36 mph. My scuppers were above the water line and the boat self bailed, no problem. I was over 6 mpg at cruise. PM me if you have any specific questions.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:03 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft