Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Repairs/Mods.

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 04-09-2004, 11:51 AM
thedink9 thedink9 is offline
Senior Member
 
Join Date: Feb 2004
Location: Shinnecock, Long Island
Posts: 315
Default Transom Edge Moulding

Anyone know where I can purchase the Aluminum edge moulding that is the thickness of the transom and has a small 1/4" edge on it that sits onto of the transom.? I have an older Taco Aftermarket catalog, but it is not in there.
Thanks
Rich (The Dink)
Reply With Quote
  #2  
Old 04-09-2004, 02:12 PM
Capt Chuck's Avatar
Capt Chuck Capt Chuck is offline
gucci
 
Join Date: Aug 2003
Location: Sailfish Capital, fla
Posts: 2,804
Default Re: Transom Edge Moulding

Good Luck finding it [img]/images/graemlins/frown.gif[/img]

I searched High and Low a few years back without success. I even went to a custom metal fabricator and he couldn't do it. I think originally it took a special jig to make the bend along with the overlapping. I ended up painting mine after filling in the pits with Epoxo 88 , a 2 part aluminum filler which dries rock solid in 6 minutes.
I guess you could do the same and have it powder coated [img]/images/graemlins/wink.gif[/img]
__________________


1978 23' Superfish/Potter Bracket 250HP --------



as "Americans" you have the right to ......
"LIFE, LIBERTY and the PURSUIT of a Classic SeaCraft" -capt_chuck
Reply With Quote
  #3  
Old 04-09-2004, 06:52 PM
ScottM ScottM is offline
Dieter Sprockets
 
Join Date: May 2002
Location: Marshfield, MA
Posts: 2,221
Default Re: Transom Edge Moulding

Quote:
I searched High and Low a few years back without success.
Did you check with Metan? [img]/images/graemlins/wink.gif[/img] [img]/images/graemlins/laugh.gif[/img]
Reply With Quote
  #4  
Old 04-09-2004, 09:53 PM
thedink9 thedink9 is offline
Senior Member
 
Join Date: Feb 2004
Location: Shinnecock, Long Island
Posts: 315
Default Re: Transom Edge Moulding

Scott

What is Metan?
Reply With Quote
  #5  
Old 04-10-2004, 10:42 AM
Rich Rich is offline
Senior Member
 
Join Date: Mar 2002
Location: Cape Cod
Posts: 622
Default Re: Transom Edge Moulding

I think Scott is referring to Metan Marine. The guy has redone a few SeaCrafts. He might have the part laying around, or might know where to get one.

http://www.metanmarine.com
__________________
Cape Marine Supply
Reply With Quote
  #6  
Old 04-11-2004, 06:35 PM
ScottM ScottM is offline
Dieter Sprockets
 
Join Date: May 2002
Location: Marshfield, MA
Posts: 2,221
Default Re: Transom Edge Moulding

Quote:
I think Scott is referring to Metan Marine.
That is correct.
Reply With Quote
  #7  
Old 04-11-2004, 08:04 PM
thedink9 thedink9 is offline
Senior Member
 
Join Date: Feb 2004
Location: Shinnecock, Long Island
Posts: 315
Default Re: Transom Edge Moulding

Rich & Scott

I'll give Metan a call.

Rich
Reply With Quote
  #8  
Old 04-12-2004, 08:49 AM
ScottM ScottM is offline
Dieter Sprockets
 
Join Date: May 2002
Location: Marshfield, MA
Posts: 2,221
Default Re: Transom Edge Moulding

Rich,
Metan has two SCs in the yard right now, a 23 Sceptre and a 23 CC. Both are going to be total resto projects, so Mike may have the trim you're looking for. He's a tough guy to get in touch with though.
Reply With Quote
  #9  
Old 04-12-2004, 12:56 PM
Rufridr069 Rufridr069 is offline
Senior Member
 
Join Date: Jan 2004
Location: Hollywood Florida
Posts: 152
Default Re: Transom Edge Moulding

Let me know if he has any. I need some for my 84' 23' CC.

Thanks.
__________________
Wasn't there, ya didn't see me, ya can't prove it! [img]/images/graemlins/cool.gif[/img]
Reply With Quote
  #10  
Old 04-19-2004, 02:52 AM
thedink9 thedink9 is offline
Senior Member
 
Join Date: Feb 2004
Location: Shinnecock, Long Island
Posts: 315
Default Re: Transom Edge Moulding

Bratpack

Still looking for the trim. I seem to recall that a old Mako that I had many years ago,had a similar trim piece.

Let me know if you find any.
Thanks Rich
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:56 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft