|
|
#1
03-27-2007, 09:31 AM
|
|||
|
|||
awlgrip
I am currently preping the inside of my 23 CC for painting with awlgrip.I have used concept and signature finish and have some experience with two part paint.I am planing to paint from the top inside gunnel down complete including the deck at this time.I am going to do this in two parts.1st the gunnels, fish box,etc.2nd will be the deck.My question is after the 1st part spraying is done and I paint the deck will I be able to overspray the the gunnel area to connect the deck at the connecting area.All painting to be done the same day.second question,awlgrip says to give the 545 primer 12 hours to dry before painting.If I go out the next morning after priming the day before do I need to do anything further before I shoot topcoat.I have read all instuctions and cant find this info. Thanks Keith
|
|
#2
03-27-2007, 06:36 PM
|
|||
|
|||
|
Re: awlgrip
Sand with 220 grit then wipe down with awlgrip wipe down solution # 400 then spray good luck
__________________
www.fiberglassman.com
|
|
#3
03-28-2007, 08:25 AM
|
|||
|
|||
|
Re: awlgrip
Hey Keith, good luck with the painting. Did you do your transom yet?
John
__________________
3 Boats / 1 Floats Re-fit or Reef-it
|
|
#4
03-28-2007, 09:55 AM
|
|||
|
|||
|
Re: awlgrip
Hey John give me a call when you can. we need to get hookuped this summer with the wifes and kids at peanut island or jupiter sandbar.How is your hand? Thanks Keith
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
