23 cc bowrail

[CooperDog]

Anybody get one made lately ?
I’m in Daytona beach area finishing up my resto.
Thanks,
Kevin

[CooperDog]

Original inset type

[SnafuFishTeam]

Birdsall Marine in WPB.

[nestorpr]

This weekend I saw dozens of bowrails available at Marine Connection Liquidators in Ft, Pierce (2970 North US Hwy #1. Fort Pierce, Florida 34946. 772-465-6460), all shapes and sizes, perhaps they have one for your boat?

[wattaway2]

Originally Posted by CooperDog

Original inset type

Takes time and patients but made my own using 2 Bow eye rollers from a trailer about 8” apart and slowly bent them from polished aluminum tube . It not only required a sweep but also had to roll it to make a dog leg. A lot of bend test and fit. Had seen the cushion set up on a newer Seacraft and liked the idea of a lil extra cushion to lean against while pulling the anchor so it saved me the very tight bends at the bow

[Old'sCool]

Originally Posted by wattaway2

Takes time and patients but made my own using 2 Bow eye rollers from a trailer about 8” apart and slowly bent them from polished aluminum tube . It not only required a sweep but also had to roll it to make a dog leg. A lot of bend test and fit. Had seen the cushion set up on a newer Seacraft and liked the idea of a lil extra cushion to lean against while pulling the anchor so it saved me the very tight bends at the bow

That's very nice!

[fredbrad]

Originally Posted by wattaway2

Takes time and patients but made my own using 2 Bow eye rollers from a trailer about 8” apart and slowly bent them from polished aluminum tube . It not only required a sweep but also had to roll it to make a dog leg. A lot of bend test and fit. Had seen the cushion set up on a newer Seacraft and liked the idea of a lil extra cushion to lean against while pulling the anchor so it saved me the very tight bends at the bow

wattaway2 where do you get the short pieces?

[wattaway2]

Originally Posted by fredbrad

wattaway2 where do you get the short pieces?

Picked them up from T&C metals you can down load there catalog they have a ton of Marine fittings worth the look don’t remember what I paid for them but remember thinking it was reasonable try pg. 130.they also have all types of aluminum trailer parts

[CooperDog]

That’s gorgeous work !

[Xcomunic8d]

Nice work wattaway. Love it.