Extreme Make Over CSC Edition

[NoBones]

Haven't heard you mention anything about a generator, so, I'm assuming the AC ran off of the main engines. Is a generator in the plans?

As far as I can tell the A/C only ran on shore power.
Now that I have Mr. Moesly's blessing on putting a bracket
on her. This will leave plenty of room for a generator in the old engine box.

Ken

[uncleboo]

A generator, a hot tub

[DonV]

Hummmm...we don't want to give Patti too many ideas!!!

Ken, the bracket with twins is a very good ides IMO.

[gofastsandman]

[QUOTE]

Now that I have Mr. Moesly's blessing on putting a bracket
on her. This will leave plenty of room for a generator in the old engine box.

Ken

I didn`t think Carl liked brackets. Was the response edited?

I dont like them for fishability reasons.

What about jack plates?

My Brother in Law is an engineer at B.I.W in Bath, Me.. He heads up weights and measures. They have Cad Cam programs. Over my head anyway. I can forward his contact info if you want.

Where are you gonna put the hog smoker? Pig weight needs to be addressed.

Cheers,
GFS

CSI Daytona?

Opti`s or V Rod`s?

[NoBones]

uncleboo & Don... you guys are killin' me!
Patti has already used up the hot tub place..


More later, Ken

[NoBones]

Sandy, Mr. M said that he designed the 27 to be a 30 footer
and that a bracket would enhance the performance!!!
That was all I needed to hear!

Ken

[gofastsandman]

Sandy, Mr. M said that he designed the 27 to be a 30 footer
and that a bracket would enhance the performance!!!
That was all I needed to hear!

Ken

`Nuff Said.

[NoBones]

Finally had a little free time to spend on the project
this weekend.
Down to some through hull fittings and bow rail stands
yet to come off.



Right now it is a down bridge...


Windows also removed


Cut out's for the old A/C



Access cover removed.
Thinking about leaving vent boxes in
for the old I/O's to let the inner hull breathe
since I'm going with a bracket.


Window frames are going to be a challenge as they are
welded with no way to replace the cording and weather
stripping. Going to check with American Marine Inc. if they can help me restore these.
They were just getting started in business when this boat
was made in 1968.. Keep your fingers crossed for me.


Teak door sanded and oiled up!
First piece of project completed.. [img]/forum/images/graemlins/tongue.gif[/img]
I think the Emblems maybe salvagable. Back in the day
there were re-chrome guys all over the place.
Now-a-days you have to look real hard to find one!


More later, Ken

[Dilligaf]

thats thing would be one bad mofo with a D6 volvo diesel

[gofastsandman]

Advanced Plating outta Tn. Riddler awards o plenty.
Do the initial grind and ship.

Cheers,
GFS