Pedestal on 23 sceptre

dginge · #1 08-16-2017, 08:10 AM

I've noticed this stainless plate in several pictures here and there on other boats.
This is on a 1978. Was this done then or added later because the screws
Were not holding? Thanks

dginge · #2 08-16-2017, 08:11 AM

Picture

caper · #3 08-16-2017, 09:46 AM

Most likely done later.

77SceptreOB · #4 08-16-2017, 02:20 PM

Not original for sure. Very likely added due to screws striping out. A common problem on tall pedistals. I had the same problem and added a larger diameter round 3/8" support plate with screw holes on a larger diameter under the standard pedistal plate. The new location and screws are holding up fine.

dginge · #5 08-16-2017, 06:59 PM

Thank you sir

Quote:

Originally Posted by 77SceptreOB

Not original for sure. Very likely added due to screws striping out. A common problem on tall pedistals. I had the same problem and added a larger diameter round 3/8" support plate with screw holes on a larger diameter under the standard pedistal plate. The new location and screws are holding up fine.