Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 05-09-2021, 01:36 PM
Old'sCool Old'sCool is offline
Senior Member
 
Join Date: Jun 2006
Location: Charleston, SC
Posts: 2,122
Default Hydrofolis for outboard engines

Let's hear the good, bad, and ugly from users here. I have had one on a previous boat years ago and it seemed to help low speed planing, time to plane, porpoising, etc.
Reply With Quote
  #2  
Old 05-09-2021, 08:38 PM
wattaway2 wattaway2 is offline
Senior Member
 
Join Date: Oct 2011
Location: Ft.Lauderdale,Fl.
Posts: 611
Default

I had a ‘77 20cc with a 225 Evinrude on it was terrible to get on plane and once on plane took off like a rocket wasn’t much in between (bought the boat that way)installed the largest hydrofoil I could find at the time and it made a tremendous difference! Wish I could / would have tried a 4 or 5 blade prop on it but that’s hind sight. I put one on my 23’cc with the 300 etec and it helped get more stern lift and then the 4 blade prop completed what I think it needed
Reply With Quote
  #3  
Old 05-10-2021, 07:14 AM
Old'sCool Old'sCool is offline
Senior Member
 
Join Date: Jun 2006
Location: Charleston, SC
Posts: 2,122
Default

Thanks wattaway2
Reply With Quote
  #4  
Old 05-10-2021, 11:56 AM
bumpdraft bumpdraft is offline
Senior Member
 
Join Date: Apr 2012
Location: Sebastian,Fl.
Posts: 612
Default

I used to have an 85 hp Johnson on my 17' Mako. When I put the 85 on my new 18' Seacraft, it was somewhat slow getting on plane. I put the foil on and it helped a lot . Later, I bought a 120 Evinrude, which had plenty of power, but I put the foil on it. Sort of a poor man's trim tabs.
Reply With Quote
  #5  
Old 05-10-2021, 05:21 PM
strick strick is offline
Senior Member
 
Join Date: Aug 2003
Location: California
Posts: 2,738
Default

Had a couple on diff seacraft....aside from ugly they helped increase low planing speed...on my 25 seafari it helped with the boats sensitivity to people moving about. You an always take it off if you don’t like it

Strick
__________________
"I always wanted to piss in the Rhine" (General George Patton upon entering Germany)
Reply With Quote
  #6  
Old 06-02-2021, 01:48 PM
SailorChlud SailorChlud is offline
Recovered
 
Join Date: Jan 2017
Posts: 359
Default

I have one on my Seafari - after I installed it I noticed better ride from keeping the bow down more, and slower minimum planing speed.
Reply With Quote
  #7  
Old 06-02-2021, 05:18 PM
Old'sCool Old'sCool is offline
Senior Member
 
Join Date: Jun 2006
Location: Charleston, SC
Posts: 2,122
Default

I did it and am very happy with the results. Lower planing speed, quicker to plane, boat generally rides higher in the stern. Let's say it "enhances" the PT 4 blade.
Reply With Quote
  #8  
Old 06-08-2021, 08:59 AM
Fr. Frank Fr. Frank is offline
Senior Member
 
Join Date: Oct 2003
Location: Shalimar, Florida
Posts: 2,265
Default

Hydro-shield is absolutely the best on the market. I've been using them on every deep-v boat I've owned for 20 years. They don't stop working when the anti-ventilation plate is out of the water and also protect the prop against bottom strikes.
https://www.hydro-shield.com/
Attached Images
   
__________________
Common Sense is learning from your mistakes. Wisdom is learning from the other guy's mistakes.

Fr. Frank says:
Jesus liked fishing, too. He even walked on water to get to the boat!

Currently without a SeaCraft
(2) Pompano 12' fishing kayaks
'73 Cobia 18' prototype "Casting Skiff", 70hp Mercury
Reply With Quote
  #9  
Old 06-09-2021, 07:12 AM
wattaway2 wattaway2 is offline
Senior Member
 
Join Date: Oct 2011
Location: Ft.Lauderdale,Fl.
Posts: 611
Default

Thanks Fr Frank very interesting and worth looking into before making the purchase !
Reply With Quote
  #10  
Old 06-10-2021, 05:28 PM
Fr. Frank Fr. Frank is offline
Senior Member
 
Join Date: Oct 2003
Location: Shalimar, Florida
Posts: 2,265
Default

Here's one mounted on my Seafari back in 2006. 90 Optimax is the motor.
Attached Images
 
__________________
Common Sense is learning from your mistakes. Wisdom is learning from the other guy's mistakes.

Fr. Frank says:
Jesus liked fishing, too. He even walked on water to get to the boat!

Currently without a SeaCraft
(2) Pompano 12' fishing kayaks
'73 Cobia 18' prototype "Casting Skiff", 70hp Mercury
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:01 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft