Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Repairs/Mods.
FAQ Community Calendar Today's Posts Search

Notices

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 03-08-2009, 03:05 AM
GradySailfish GradySailfish is offline
Senior Member
 
Join Date: May 2005
Posts: 167
Default Re: Re-Powering my 20 footer MA

I have a 78 20 MA and she's powered by a 150 ETEC. I top out at a little over 40 MPH, but I need to tweak my prop. Currently I'm turning a 14 x 19 3 blade stainless wheel. I think I'm going to try some props suggested by Bushwacker.

Speaking of Bushwacker, he has a 20 Seafari with 150 ETEC and hung on a bracket. He ghets top ends in the middle to upper 40's. I hope he chimes in here.

As for overall performance of the engine, I'll just say right out that its outstanding. I only have half of one season on the engine, but I'm impressed so far. Fuel efficiency, holeshot, etc are all excellent. You don't need 200 HP for that boat, honestly if the 130 ETEC was around when I was putting new power on I would have gone with the 130.

I normally cruise at 3300, which yeilds a speed of about 22 knots and fuel milage of about 4 Nautical (or 5 statute) miles per gallon.

If you have any questions please feel free to PM me.

-Alex
__________________
2002 26 Fortier Yanmar 250 6LP-DTE
1978 20 Sea Craft Master Angler 08' 150 ETEC
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:45 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft