Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Performance
FAQ Community Calendar Today's Posts Search

Notices

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 08-09-2010, 07:42 PM
Yz2009 Yz2009 is offline
Member
 
Join Date: Aug 2010
Posts: 61
Default 100hp on a 20 sf?

I've been reading a little on the 20 sf's. I'm considering buying a early 80's 20sf and have a few questions. I've seen some people saying 90-130 hp can be good for these hulls and was wondering is there any truth to that. I've currently got a seaox 2300 with a yamaha f100 and cruise at 22mph at 4700rpm and wot 28mph at 5400rpm. The hulls of the seaox and seacraft weigh about that same but the seacraft has a deeper v and is 3ft shorter. If I was to put the f100 on the seacraft would I get similar results? Also I've read 4s engines are not a good combination on these hulls but the f100 only weighs 366lbs and I could get rid of the oil tank and move the battery to the center console. Any insight would be greatly appreciated. Thanks.
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:11 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft