*** 23' Sceptre / Tsunami Engine Height Set Up *** How High

[GameOnSalmon]

Hey Guys,
What height are you running your Cavitation plates on your 23'
Sceptres. I have seen a couple posts saying that this hull likes at
least 2 Inches High above the bottom of the Hull... I am wondering
if its possible to get Great Performance with the right prop at 2 1/2".

WHY? I am having a hell of a time finding a 25" shaft motor in my price
range. I can grab 200 and 225 hp motors all day long at 20". I have
an enclosed transom and 29" Stainless Marine Setback Bracket with
flotation. If i could get through this season with a Decent 20" Motor
then Next going to Spring and put on a Reconditioned 300hp Evinrude
Etec.

Ideas...Thoughts... I know the engine is sitting low, but... If it will work its
better than dropping the $900 to install the bay Extension kit... or the
10 hours to swap out exhaust housings and gearboxs.

Let me.. Know your Cavitation Plate Height.. along with Engine Set Up and Prop... with Prop Pitch/Diameter.

Thanks in Advance Robert