Another 20 resurrection

[TPG]

Originally Posted by Bigshrimpin

This is correct ^^^

I've done a few 20's and two 3/4" sheets won't work. It's too wide.

By all means, come on by and look yourself, and wouldn't that be too thick, and not too wide?









whether this transom was redone at one point or another, good question, it could have been, but thats 1 1/2 inches worth of plywood in there.

Also measuring 3/4" ply, it isn't 3/4" ply, its usually 23/32, sometimes 21 or 22. So will two "3/4 inch thick" plywood sheets fit? Yes.

But I digress because this completely retarded.