|
|
#11
08-25-2017, 04:23 PM
|
|||
|
|||
Very nice glass work!
FYI - cutting out the inner liner between gunnel and floor removes a LOT of torsional stiffness from Moesly's original design! If you installed some 1/2 balsa core on the hull sides, that would significantly stiffen the hull without much of a weight increase!
__________________
'72 SeaFari/150E-Tec/Hermco Bracket, owned since 1975. http://i188.photobucket.com/albums/z...Part2019-1.jpg 
|
|
|
Threaded Mode