Trailer Information

[bumpdraft]

Ok, the op did ask for some measurements. Got the boat loaded up last night and was relieved to get it away from the end of the dock. I don't have the fenders on yet. The forward end of the wood portion of my bunks is 4 3/4 inches thick on the outer edge (tapered with the hull). The rear end is 2 inches thick. The good thing about having the bunks further apart I believe is that it gives the rig a lower center of gravity as well as not having to sink the trailer as far into the water (I don't have a winch). The bad thing is making sure to tilt the engine some, before pulling out of the water.