18...and I like it

[steel686]

Removing the core from the liner was more work than I expected. The base of the coffin came out reasonably well and there were a few wet spots in the deck. Any where the balsa was still dry it came out hard. Finished up with a few hours of grinding with 36 grit and a shroud. Full Tyvek on a 90 degree afternoon is rough. I don't know how you guys do it down in the Sunshine State. The Divinycell has since been glued in and the stringers have been foamed and leveled. I plan to lay up two layers of 1708 on the liner and drop it back in to check clearance before laying glass on stringers.