1988 18sf

[bobmac]

1988 18' SeaCraft for sale EDIT: Sorry, I have the wrong date. My eyes are failing me. It's an 85, not an 88.

the hull and floors are solid, and everything works as it should. I just ran all new tinned sheathed wire throughout the boat, and installed led lights under the gunnel.

I'm currently installing a 40 gallon aluminum epoxy coated gas tank this week, nearly complete. Then I have to screw down the center console, and connect the wiring.

All work will be completed before the sale.

I added all new waterproof manual reset breakers under the console and a second at the transom, 3 way battery switch, a brand new fuse box and replaced two of the breaker switches, they all work.

The motor is a 2002 Yamaha 115 4 stroke with perfect compression. I've owned this boat for 5 years, had it 40 miles offshore many times. It's never let me down.

Last spring I replaced all filters and put brand new injectors in it. It pushes the boat about 37 mph fully loaded with two big guys on board. I've hit 42 in optimal condition by myself.

I never intended to sell this boat, it's the perfect boat for single handed use, and I can safely take it offshore. I've been a boater my whole life, sold SeaCrafts for Bass Pro years ago, and was a customer service supervisor in their Marine division. I got to know the boats thoroughly, taking customers for test rides in all their various sizes, and been in love with them ever since. But, then my oldest son had our first grandchild 4 years ago, then my youngest son had one, then they both had a second, and then my middle son had our 5th grandchild last March.

I need a bigger boat, got one you'd like to trade?

Includes:
Hydraulic steering
Hummingbird 9 DI with brand new through hull transducer
Ray marine dragonfly 7 chirp with transom mounted transducer
Ship to shore radio
SS bimini top
200' of new rope, with danforth anchor and chain
New Bronze through hull water pickup installed for future raw water wash-down
Newly Rebuilt Aluminum Float On trailer

***Note: the pictures show my old trailer, also for sale separately. And I know, it needs a bath . I'll pressure wash it before she goes. The boat is still on the old trailer. This sale includes the rebuilt trailer described and pictured below.

Issues:
The trim has developed a small leak if you store the motor up, without engaging the lock. The seals on the rams are new, and the trim pump is new. The leak is coming from the tiny o rings under the trim motor mounting block - and difficult to get to because of a Yamaha design flaw, the bolts corrode and seize. I'm including a second used trim unit for rebuilding, but I've been running it like this for three years without issue.

I installed a brand new transom lite, and wiring, but it has issues and I haven't traced it down yet. The base and pole don't seem to mesh. I am going to troubleshoot it after I reinstall the console.

The gel coat and guard rail has many scratches / spider webbing, as to be expected on a 25+ year old boat.

The Todd cooler seat ice chest has several cracks from being dropped but still keeps ice. It is currently uninstalled.

I'll add photos later today.

The boat is located in Clay County, about 30 miles south of Jacksonville Florida.

Asking $10,000obo

One last note,

I only have this for sale on this sight, so far. I want it to go to a good home, and have a lot of respect for it's members. I've lurked here for many years, rarely posting.

I'm in no hurry to sell, and all repairs I'm doing are done as if I'm keeping it, the right way, although I am negotiable on the price, and willing to trade.

After completing the work I've listed I plan to continue work on the boat, with floor and gunnel Alexseal non skid, and replace the flip flop cooler seat with a leaning post. I also have all new wash-down kit, and macerator pump for the fish-box to install in a few weeks if it doesn't sell. If it doesn't sell before I add these things, the price will go up.

Trades: I'm not interested in a project. Must be water ready. I'm looking for a 20'-23' with cuddy. I have my eye on an old restored 20' shamrock predator cuddy. I like the classics. Let me know if you have something similar you'd like to trade.

Best way to reach me is email
[email protected]

Payed for ad with paypal -> [email protected] Transaction ID: 9CE11451DU982743X