Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > General

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 08-07-2002, 12:03 AM
timd timd is offline
Member
 
Join Date: Feb 2002
Location: Phoenix, AZ
Posts: 49
Default It's finished!

Finished my 20' SeaCraft and have been enjoying it in Rockport, TX since mid June. Here is a picture before we left:


PS Trayder, I sent updated project pictures to post. Let me know if you need me to resend. Thanks for keeping this site going, it's the first place I check when I'm surfing!
Reply With Quote
  #2  
Old 08-07-2002, 10:26 AM
John R John R is offline
Senior Member
 
Join Date: Feb 2002
Location: Narragansett Bay
Posts: 1,374
Default Re: It's finished!

Tim - Excellent Work! The boat looks fantastic and I'm dying to see more pics (feel free to e-mail them to me too)...

How did you paint it? Yourself or at a shop?

Thanks....
__________________
Surf and Boat fishing for
Striped Bass

http://striped-bass.com/images/sb_small180b.gif
Reply With Quote
  #3  
Old 08-07-2002, 10:35 AM
Hammer Hammer is offline
Member
 
Join Date: Feb 2002
Location: Pascagoula, MS
Posts: 64
Default Re: It's finished!

Looks Great! I would like to see a picture of that swim ladder.
Reply With Quote
  #4  
Old 08-07-2002, 12:50 PM
Scott Scott is offline
Senior Member
 
Join Date: Feb 2002
Posts: 1,272
Default Re: It's finished!

Very nice !!!!

I too would like to hear about the paint job!! [img]images/icons/wink.gif[/img]
Reply With Quote
  #5  
Old 08-08-2002, 08:41 AM
timd timd is offline
Member
 
Join Date: Feb 2002
Location: Phoenix, AZ
Posts: 49
Default Re: It's finished!

Thanks for the comments! The paint is Awlgrip, and I did it in my driveway. The transom was rotten from an improperly installed swim ladder, and I rebuilt it to 25". At the same time I closed in the worthless vent holes at the stern corners. Much filling and fairing and sanding, then 3 coats of the Awlgrip 545 primer sprayed inside and out. Sanded that with 360 grit, and then 3 coats of Awlgrip "Fighting Lady Yellow" rolled and tipped. Inside I used the "Oyster White" and the course anti-skid on the decks and hatches. I had never done it before, although I have sprayed cars when I was younger. The t-top is from a 23" Parker, and it had to be narrowed and have the mounting pads relocated to fit the original console. It is stainless and I used the Pro-Trim material as the fabric, very impressed with that stuff so far. I built the radio box out of that blue builders styrofoam and covered it with epoxy and cloth, and painted it with the Awlgrip. I cut the front storage seat off the console and replaced it with a cooler seat. Although you can't see it in the picture, I made a barstool type seat for the Captain, I think they are real cool! Completely re-wired, rebuilt 1985 200 Johnson, repainted, with the 2000 model decals. After all the work I had to break down and buy the Loadmaster trailer, which pulls like a dream. I started in February by taking a vacation to do the transom, and finished in mid June.
Reply With Quote
  #6  
Old 08-08-2002, 09:48 AM
FELLOW-SHIP FELLOW-SHIP is offline
Senior Member
 
Join Date: Feb 2002
Location: Cooper City, Fl
Posts: 1,798
Default Re: It's finished!

HA TIMD
LOOKS GREAT I’M SURE YOU WILL LOVE USING HER FOR A LONG TIME. GOOD LUCK
FELLOW-SHIP [img]images/icons/shocked.gif[/img]
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:50 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft