Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Repairs/Mods.

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 05-07-2004, 08:33 PM
rcnight rcnight is offline
Senior Member
 
Join Date: Oct 2002
Location: Gainesville, FL
Posts: 420
Default Outboard Rigging

I just repowered my 83 CC with a 97 Evinrude 150. The engine came with the wiring harness & ignition switch. Missing was the System Check gauge - so I bought an OMC tach with the system check incorprated. Naturally the connectors and the wire colors don't match, althought the number of wires do match. Also, since the new system only offers a temperature warning, is a temp gauge needed? I thought I'd replace the temp gauge with a water pressure. All replies appreciated.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:08 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft