Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Repairs/Mods.

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 06-16-2004, 01:36 PM
Abe's Rocket Abe's Rocket is offline
Senior Member
 
Join Date: Oct 2003
Location: Maine
Posts: 368
Default running an outboard without oil

What happens to a motor if oil isn't mixed in with the gas? Will all the cylinders burn-up equally or just one or two? I have a feeleing the yard left out the oil this spring...good times.
__________________
1986 Seacraft 23CC
etec 250
Portland, Maine
Reply With Quote
  #2  
Old 06-16-2004, 04:10 PM
Mark Mark is offline
Senior Member
 
Join Date: May 2002
Location: 80304
Posts: 1,252
Default Re: running an outboard without oil

I think you will only burn out one or two at the most. Considering the rise in petroleum prices, I would hold off on adding oil until things get cheaper.
Reply With Quote
  #3  
Old 06-17-2004, 06:46 AM
PipeDreamsMarine PipeDreamsMarine is offline
Senior Member
 
Join Date: Oct 2002
Location: Woodbine New Jersey
Posts: 673
Default Re: running an outboard without oil

I've seen them run 100:1 and not have a problem. Is it straight gas or straight gas was added to a tank that had premix in it?. If it's straight gas and wasn't run too hard or long you should be ok. or if it was added to a tank with premix in it your ok, just add more oil.
__________________
Don Battin
Pipe Dreams Marine
"Design her right,
Build’er well
Bend the throttles,
And let’er eat…."
Carl Moesly
Reply With Quote
  #4  
Old 06-17-2004, 08:24 AM
Abe's Rocket Abe's Rocket is offline
Senior Member
 
Join Date: Oct 2003
Location: Maine
Posts: 368
Default Re: running an outboard without oil

its more of a situation where the boat went in the water and a couple of days later i had a toasted cylinder on a motor that was too small for the boat anyway. got another motor, 6cyl, on the cheap; put it on the boat and now we are going down the same road with the motor not behaving. same exact symptoms in both cases, could be coincidence but i am having a hard time beliving it.
__________________
1986 Seacraft 23CC
etec 250
Portland, Maine
Reply With Quote
  #5  
Old 06-17-2004, 12:41 PM
sokinwet sokinwet is offline
Member
 
Join Date: Jul 2002
Location: S.E. Massachusetts
Posts: 36
Default Re: running an outboard without oil

Did the same thing this year; put 5 gals. in an empty tank w/oil and added another 20 gals. without. Luckily I caught myself in time. Keep in mind that the only lube for your 2 stroke is the pre-mix. This includes not only your piston but also top end bearing, crank and lower end bearings. Ouch$$$$$
Reply With Quote
  #6  
Old 06-17-2004, 02:11 PM
Abe's Rocket Abe's Rocket is offline
Senior Member
 
Join Date: Oct 2003
Location: Maine
Posts: 368
Default Re: running an outboard without oil

Does anyone know of a tool that can measure the ratio of oil to gas in a tank? I picture it being similar to how you check coolant levels in a car motor.
__________________
1986 Seacraft 23CC
etec 250
Portland, Maine
Reply With Quote
  #7  
Old 06-17-2004, 03:13 PM
ScottM ScottM is offline
Dieter Sprockets
 
Join Date: May 2002
Location: Marshfield, MA
Posts: 2,221
Default Re: running an outboard without oil

It's a 50:1 ratio for 2 stroke outboards, so for every 50 gallons of gas, you add 1 gallon of oil. As far as a tool that can tell you what's already in the tank for pre-mix, I don't know if one exists.
Reply With Quote
  #8  
Old 06-18-2004, 10:49 AM
Rufridr069 Rufridr069 is offline
Senior Member
 
Join Date: Jan 2004
Location: Hollywood Florida
Posts: 152
Default Re: running an outboard without oil

Once its out of warrantee....ditch the oil injection and premix the oil and fuel. I cant tell you how many motors have fried from the injector pump going out at WOT. My motor has 1200 hours on it using premix and the compression is still 110 all around. Now if the lower units would last that long they would probally go out of business. West Marine has this nifty little bottle that tells you how much oil for how much fuel. Its alot easier than trying to figure out how much oil to put in when you fill up with 36.5 gallons.
__________________
Wasn't there, ya didn't see me, ya can't prove it! [img]/images/graemlins/cool.gif[/img]
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:03 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft