Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Repairs/Mods.

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #21  
Old 05-11-2009, 10:06 AM
Callipygian Callipygian is offline
Member
 
Join Date: Oct 2008
Posts: 37
Default Re: What goes in the crack?

What is the red material? Should their be a fiberglass bond between the liner and the hull or is that some kind of caulking material I can inject in there? I guess my real question is what should I do now? It's tough getting started without much training. Thank you for the advice.
Geoffrey
Reply With Quote
  #22  
Old 05-11-2009, 10:29 AM
hermco hermco is offline
Senior Member
 
Join Date: Mar 2002
Location: Jensen Beach, FL
Posts: 827
Default Re: What goes in the crack?

I made that diagram to show that the liner is not structural in nature. The gap that you say is present would not be a structural issue to me. It is however a way for water to get into the bilge so you may want to seal it. I have seen these boats with this gap filled with putty but due to the natural flexing of the hullsides there are usually cracks that form. You could pull back the carpet,grind,and glass the seam or fill with a flexible caulking.
Reply With Quote
  #23  
Old 05-11-2009, 11:39 AM
Callipygian Callipygian is offline
Member
 
Join Date: Oct 2008
Posts: 37
Default Re: What goes in the crack?

Got it. Thank you. I've spent some time in Jenson Beach. My Father-in Law lives there. Best kept secret in Florida. I hear Jan's is back in town. I owe you a breakfast next time I'd down. Best regards,
Geoffrey
Reply With Quote
  #24  
Old 05-11-2009, 11:44 AM
hermco hermco is offline
Senior Member
 
Join Date: Mar 2002
Location: Jensen Beach, FL
Posts: 827
Default Re: What goes in the crack?

Jan's is open again. The best breakfast in town. My mom works as hostess on weekends.
Reply With Quote
  #25  
Old 05-11-2009, 08:53 PM
Callipygian Callipygian is offline
Member
 
Join Date: Oct 2008
Posts: 37
Default Re: What goes in the crack?

One last question. In your diagram the liner went almost up to the cap. On my boat the liner only extends up around 4". The carpet is actually applied to the inside of the hull not to a liner. I will try to post some pictures but is that how the carpet was typically applied?
Reply With Quote
  #26  
Old 05-11-2009, 09:15 PM
hermco hermco is offline
Senior Member
 
Join Date: Mar 2002
Location: Jensen Beach, FL
Posts: 827
Default Re: What goes in the crack?

My first diagram was an attempt at showing your liner,the second was a diagram that attempted to show a typical boats liner. The carpet in yours might have been installed before the liner at the factory or a previous owner might have stuffed it down the crack. Either way the carpet should come out of the crack if you want to fill it. Or you could leave it alone. It's your crack and I'm not gonna tell you what to do with it.
Reply With Quote
  #27  
Old 05-11-2009, 09:18 PM
Callipygian Callipygian is offline
Member
 
Join Date: Oct 2008
Posts: 37
Default Re: What goes in the crack?

http://i612.photobucket.com/albums/t...h_IMG_0523.jpg
http://i612.photobucket.com/albums/t...h_IMG_0524.jpg

I am not sure how to make the larger but if you look close you can see a what looks like a cut edge at the top of the liner lip.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:45 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft