#1
|
|||
|
|||
A&J Bracket?
Anyone used an A&J Flotation Bracket on a 23' seacraft for a single engine? Again, the cost is nearly half that of an armstrong bracket of the same size.
|
#2
|
|||
|
|||
Re: A&J Bracket?
or should i say a bracket built by A&J Marine in Miami.
|
#3
|
|||
|
|||
Re: A&J Bracket?
Um... didn't someone just start a similar thread called "D&D Brackets"?
http://www.classicseacraft.com/forum...b=5&o=&fpart=1 The consensus seems to be that a fiberglass bracket from Hermco is the way to go. |
#4
|
|||
|
|||
Re: A&J Bracket?
Quote:
|
#5
|
|||
|
|||
Re: A&J Bracket?
My bracket was built by A&J in Miami. It is on an 18SF and has a 36" wide flotation chamber and has a set back of 22". It was made to my specs. It is nicely made and finished. My first choice was a Hermco but it was more than twice the $$. The aluminum will require more maintenance than a Hermco.
|
#6
|
|||
|
|||
Re: A&J Bracket?
I had one on my sceptre. It was built to my specs. It seemed to be built good however the powder coating on it sucked.
__________________
Steve B 1978 23ft SeaCraft Seavette 502HP ZZ502 Mercruiser TRS Drive-Sold-UGH! 1998 28ft Carolina Classic 7.4 Volvo Penta Duo Prop |
#7
|
|||
|
|||
Re: A&J Bracket?
On my 21 which is really a 22 I used one and I like it, you know the 23 was splashed off this 21,cut down & modified.
__________________
I heard it on the coconut telegraph.......... |
#8
|
|||
|
|||
Re: A&J Bracket?
Quote:
__________________
[SIGPIC][/SIGPIC] "If You Done It...It Ain't Braggin" my rebuild thread: http://www.classicseacraft.com/commu...ad.php?t=18594 |
Thread Tools | Search this Thread |
Display Modes | |
|
|