|
|
#1
11-11-2009, 10:37 PM
|
|||
|
|||
Bow/Gunwale Rodholder for 20SF
Anyone have a pattern for the factory teak rodholders that are forward under the cap? Any help is much appreciated. Thanks BruceB
__________________
Thank goodness that in the scheme of things you are broke, powerlesss and inconsequential, because with the shortsighted alternatives and idealogy you have you'd be much worse than those you complain about. 
|
|
#2
11-15-2009, 10:05 AM
|
|||
|
|||
|
Re: Bow/Gunwale Rodholder for 20SF
Bruce,
I see you have a 1974sf. I think the patterns are slightly different for different years. I borrowed the teak rod holders from a friend who has a 71 or 72sf. They wouldn't fit in my 75sf. I just finished making my own rod holders. They are 3/4" plywood covered by two layers of glass. As of yesterday they are primmed and ready for paint. I can make you a template if you like and send them over to you. May not fit perfect but will likely be a good starting point. -will
|
|
#3
11-15-2009, 05:56 PM
|
|||
|
|||
|
Re: Bow/Gunwale Rodholder for 20SF
that would be Great Will thanx ...Pm Me
__________________
Thank goodness that in the scheme of things you are broke, powerlesss and inconsequential, because with the shortsighted alternatives and idealogy you have you'd be much worse than those you complain about.
|
|
#5
11-18-2009, 12:10 AM
|
|||
|
|||
|
Re: Bow/Gunwale Rodholder for 20SF
Thanks for helping out guys.
__________________
Thank goodness that in the scheme of things you are broke, powerlesss and inconsequential, because with the shortsighted alternatives and idealogy you have you'd be much worse than those you complain about.
|
|
#6
03-16-2010, 12:32 PM
|
|||
|
|||
|
Re: Bow/Gunwale Rodholder for 20SF
Does anyone still have the patterns for this? I remade mine 2 years ago using Ipe (which was horrible to work with, some tough stuff!) and they didn't turn out just right, usable but still could be better. Remaking them now out of 3/4" Black Starboard and can't find my originals to use as a template. I have a 74' 20SF. Thanks!
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
