Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Repairs/Mods.

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 04-09-2012, 06:21 PM
BadBowtie03 BadBowtie03 is offline
Junior Member
 
Join Date: Apr 2012
Posts: 5
Default Rebuilt 20' Sea Craft CC? Need boat builders opinions!

Hey guys, I am very seriously interested in a 20' 1972 sea craft CC. The boat was redone in 2011 with a new composite floor, transom and paint and gel coat and all. I have not seen the boat in person, but a buddy has. Granted, he is not a boating expert but it helps. Anyways, I wanted to get yalls opinion on the boat and the way it looks to be built. The transom was filled in the back and squared off and now has an armstrong bracket holding up the 2001 hpdi 150 yamaha. My buddy looked all over the boat and said everything felt solid... like the floor and transom and bracket. But, another one of my friends (based on the pictures here) said it looked like they did a shabby job on the transom rebuild and the boat looked like it needed work. Can anyone that really knows these boats or knows rebuilding boats give me an opinion? How do yall think it looks? Thanks!

















So, based on the pictures... what do yall think? How much do you think I should pay for a boat like this? Thanks for the help! I really appreciate it!!!
Reply With Quote
  #2  
Old 04-09-2012, 06:21 PM
BadBowtie03 BadBowtie03 is offline
Junior Member
 
Join Date: Apr 2012
Posts: 5
Default





Reply With Quote
  #3  
Old 04-09-2012, 09:23 PM
Mikem8560 Mikem8560 is offline
Senior Member
 
Join Date: Apr 2011
Location: Charlotte Harbor Florida
Posts: 577
Default

im no expert and cant comment on the bracket quaality but the storage lid look prety ameture diy along with thre baitwell in there . on the motor i had a 2001 150 hpdi i loved mine only had to replace a fuel pump once no bigdeal i did hear the 200s had troubles
__________________

82 seacraft 20SF

Bayview Canvas
Reply With Quote
  #4  
Old 04-09-2012, 10:42 PM
jorgeinmiami jorgeinmiami is offline
Senior Member
 
Join Date: May 2005
Location: Miami Fl
Posts: 1,613
Default

I calso can't comment on the qualty of the platform but here is my humble opinion

1st if I were selling my boat it would be clean....really clean
Pine needle around the batteries, it looks like the inside of the console next to batteries is dirty
Bilge area also dirty...lines thrown on the deck, wires hanging along the insides

just a bad impression when one goes to see a boat for sale

2nd the hatch area looks to be poorly done if it was done by a pro

but depending on the price and what you want it to look like then maybe

just make sure the major things have been done right

Just my 2 cents worth
Reply With Quote
  #5  
Old 04-10-2012, 06:04 AM
Caymanboy Caymanboy is offline
Senior Member
 
Join Date: Aug 2008
Location: Ft Laud, Florida
Posts: 771
Default

My 2c.
I saw that you also had the same posting on THT, but I didn't want to jump in the fray over there.
People alway feel that because they put x amount into a boat, they should get return on that money, that is not the case if it is poorly done.
These are some items I would consider or ask about.
1) It is a single engine bracket, not much flotation there, the boat looks like it floats VERY low in the stern, look at the scum line on the bracket and on the bow of the boat.
2) There has been some home made ventilation cuts in the prop, they are trying to get this thing out of the hole.
3) The overall craftsmanship of the re-do is very poor, and this is the stuff you can see, what about what you can't?
4) How does the deck drain? 72's did not go through the bottom.
5) The wiring and rigging is poorly done.
6) Check to see that it has a clear title, and is the right title.
All that being said, there is some value to stuff, hull, t-top, engine. Decide if the boat suits your needs, decide if you want a continuing project, check to see if the engine is good. Make an offer on that.
In my opinion, it is not a turn key boat for that kind of money.
__________________
1972 20' SeaCraft SF, F200XB
1974 40' Eagle
www.parkeryacht.com
Reply With Quote
  #6  
Old 04-10-2012, 10:00 AM
shine shine is offline
Moderator
 
Join Date: Sep 2010
Location: Vero Beach, FL
Posts: 597
Default

I would cut it a little slack if the pictures were taken by your buddy who went to go see it. If you rushed to clean to the boat every time a looker came to kick the tires, you would go crazy.

You cannot tell anythign about the quality of the transom job by those pictures, you need to know what materials were used, who did the work, and pictures of the re-build. Anyone re-building should take MANY pictures so you can document the quality of the work !

Also, just becasue the hatches are rough does not mean anything other than the hatches are rough. For a pure fishing boat, I personally would not go much nicer. For a fishing boat where functionality is of first concern, I would actually just slap a few pre-made hatches on there.

fuel/water separator needs hose clamps.

One thing you did not mention is that tank, ask if its original and if it was moved/replaced?

I do not know about the drainage, you need to talk to the guy who rebuilt it. Who ever it was did a pretty good job on the enclosure, the edges are fair and it blends into the sole pretty well. Its not a bad job from what I can tell by the pictures - which is not much Talk to the guy yourself, get the full scoop from him, and ask for pictures of the rebuild!
Reply With Quote
  #7  
Old 04-10-2012, 09:08 PM
Ryan Ryan is offline
Senior Member
 
Join Date: Jan 2003
Location: ft. lauderdale fl
Posts: 718
Default

Also looks like the bracket is cracked. If you dont feel like you can asess the condition on your own , hire a surveyor to look it over. He will probably tell you much of the same things Caymanboy has told you unfortunately.
Reply With Quote
  #8  
Old 04-11-2012, 12:42 AM
BadBowtie03 BadBowtie03 is offline
Junior Member
 
Join Date: Apr 2012
Posts: 5
Default

I think i am going to pass on it just because to me it doesn't look like it was done up to snuff. It just worried me. I really want to buy something that is turn key and looks correctly built. I don't want to have to sink 2k into something the first 2 weeks i own it. Thanks for the advice guys.
Reply With Quote
  #9  
Old 04-11-2012, 09:06 AM
ChampionShip ChampionShip is offline
Junior Member
 
Join Date: Jan 2012
Location: Algoma, Wi
Posts: 25
Default

With that bait tank in the transom being off center would you need trim tabs to make it ride level?
Reply With Quote
  #10  
Old 04-11-2012, 04:25 PM
Bigshrimpin Bigshrimpin is offline
Senior Member
 
Join Date: Dec 2002
Location: Onset, MA
Posts: 2,712
Default

Run Away! That is not worth 11k imo
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:44 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft