Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Performance

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 06-04-2013, 11:48 PM
Normagain Normagain is offline
Senior Member
 
Join Date: May 2012
Location: So Cal
Posts: 163
Default Full Load Performance Numbers and a Few Pics

I finally got some performance numbers with my boat fully loaded and almost fully rigged. A few details to the console and trim pieces but I've had her out about seven times already. So, I'm running a Solas Amita 3 blade aluminum 13.5" X 15 pitch prop on my 06 Yamaha F115. Speed numbers are MPH/statute miles.

700rpm 2.7mph
1000 4.1mph
1500 5.3mph
2000 6.7mph
2500 7.9mph
3000 9.2mph
3500 14mph
4000 20mph
4500 26mph
5000 30mph
5800 35mph

This is with just me and the bait tank full which is a monster at about 50 gallons. I know, it's a bunch of water but I got a good deal on it used and fish bait a lot. Most of the time it will be running about 35 gallons of water anyway (adjustable level) so running full simulated having a passenger on board, or at least half of one.
Reply With Quote
  #2  
Old 06-04-2013, 11:54 PM
Normagain Normagain is offline
Senior Member
 
Join Date: May 2012
Location: So Cal
Posts: 163
Default

Here are some pictures showing how the stern/scuppers sit. It was really light, almost too light when the tank and lean post were not there. With the tank empty it sits about how I would really like it and performs really nicely, quick out of the hole, lots of power in the mid to upper range! With water in the tank it is a bit more sluggish but not bad. I'm going to try a stainless 4 blade soon to see how much better that does. I'm willing to lose the speed to gain some consistency in power when fully loaded. It is a bit of a struggle to hold that 14mph planing speed and I'd really like to have that if possible. I hope it pans out but I'm pretty happy as is!
Attached Images
   

Last edited by Normagain; 06-05-2013 at 12:00 AM.
Reply With Quote
  #3  
Old 06-04-2013, 11:56 PM
Normagain Normagain is offline
Senior Member
 
Join Date: May 2012
Location: So Cal
Posts: 163
Default

Finally, a couple more pics. 20lb California Halibut and the boat on the trailer.
Attached Images
  
Reply With Quote
  #4  
Old 06-05-2013, 01:59 AM
McGillicuddy McGillicuddy is offline
Senior Member
 
Join Date: Dec 2007
Location: 32.77 N, 117.01 W
Posts: 2,184
Default

Nice doormat, Normagain. Bounce ballin' w/flashers?
Glad you got out of the burn zone for a while. Lookin good. Huge bait tank, but keeps the bait fresh. 4 blade will help. Check out PowerTech MQF 4 and SCD 4
__________________
there's no such thing as normal anymore...

Last edited by McGillicuddy; 06-05-2013 at 02:04 AM.
Reply With Quote
  #5  
Old 06-05-2013, 06:53 AM
flyingfrizzle flyingfrizzle is offline
Senior Member
 
Join Date: Sep 2012
Location: Eastern NC
Posts: 1,653
Default

Quote:
Originally Posted by Normagain View Post
Finally, a couple more pics. 20lb California Halibut and the boat on the trailer.
I wish we had monsters like that over here on the east coast. Love to fish for the flaties!
__________________
Current SeaCraft projects:
68 27' SeaCraft Race boat
71 20' SeaCraft CC sf
73 23' SeaCraft CC sf
74 20' SeaCraft Sceptre
74 20' SeaCraft CC sf
Reply With Quote
  #6  
Old 06-05-2013, 09:17 AM
Normagain Normagain is offline
Senior Member
 
Join Date: May 2012
Location: So Cal
Posts: 163
Default

Quote:
Originally Posted by McGillicuddy View Post
Nice doormat, Normagain. Bounce ballin' w/flashers?
Glad you got out of the burn zone for a while. Lookin good. Huge bait tank, but keeps the bait fresh. 4 blade will help. Check out PowerTech MQF 4 and SCD 4

No, live monster sized sardines that day out of Del Rey. Apparently, they only found this bait for a week or so, everything else has been tiny anchovies. I also had a 10lb maybe 15 minutes after that in the same spot. It was mothers day so I had to leave them biting and head in early. The other interesting thing is I caught five baby octopus, well, most of them were just hanging on to the bait, not hooked. I've only caught one before personally in all my time in that area, pretty cool.

Thanks for the prop advice. I actually have that SCD 4 saved in a link.
Reply With Quote
  #7  
Old 06-06-2013, 10:19 AM
fly4navy fly4navy is offline
Senior Member
 
Join Date: Oct 2012
Location: East Orleans Cape Cod
Posts: 164
Default Performance Numbers

Interestingly, on my 74 20ft CC SF I am now using a 13 7/8 X 15 SST prop on my new E-TEC 115 and my numbers are virtually identical to yours. The only difference perhaps is that I am carrying a fairly hefty T-Top which does throw in some wind resistence.

I am pretty happy with the performance at this point.
Reply With Quote
  #8  
Old 06-06-2013, 11:08 AM
jerry1 jerry1 is offline
Member
 
Join Date: Apr 2010
Location: Plantation, FL
Posts: 45
Default

How about gph numbers from both of you for comparsion ???
Reply With Quote
  #9  
Old 06-06-2013, 08:16 PM
FishStretcher FishStretcher is offline
Senior Member
 
Join Date: Dec 2010
Location: Greater Boston
Posts: 1,117
Default

With a Yammie F100 plus a kicker, probably similar transom weight, I run a touch slower with the Solas Amita 4 blade in 13x15 in aluminum. Plus a hydroshield. 33MPH. Same revs. Sometimes I can plane down to 12, mostly 14. I would try the 4 blade, and then a hydroshield if you want that low planing speed.
Reply With Quote
  #10  
Old 06-07-2013, 10:33 PM
Normagain Normagain is offline
Senior Member
 
Join Date: May 2012
Location: So Cal
Posts: 163
Default

Quote:
Originally Posted by jerry1 View Post
How about gph numbers from both of you for comparsion ???
I didn't put them down unfortunately but that would be wise to do before switching props.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:13 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft