Sea Craft 20' Forward fish box hatch cover wanted

[ruckus]

I am looking for a fwd hatch cover for my 88 20' Sea Craft any help is appreciated..

[dave s]

You can have any of the hatches off my 18. Give me the dimensions you need, and I'll measure to see if any will work.
I was about to put all the old glass out for trash pickup.

[ruckus]

Thanks Dave, I will take the measurements when I get back to the house and get in touch with you.

[gofastsandman]

Originally Posted by dave s

You can have any of the hatches off my 18. Give me the dimensions you need, and I'll measure to see if any will work.
I was about to put all the old glass out for trash pickup.

Dave, do you have the port side transom box insert?

[ruckus]

wanted fish box cover highlighted in yellow for a 20' SF

[uncleboo]

I don't think the one from an 18 will fit.

[dave s]

My hatches are 26.5"x24"; my 18's front fishbox hatch lid is the same size as the rear livewell hatch, so don't think they'll fit your 20'.

GFS, there were no transom box inserts on my hull.

[gofastsandman]

The search continues.

Cheers,
GFS

[UrbanAngler]

I damaged mine last winter when trying to remove the core. While trying to chisel out some not-so-soft core, I damaged the outer skin in a few spots. I think it could be fixed, however, the remainder of the core would have to finish being removed, and replaced.

Instead of repairing it myself, I decided to make a mold and make a whole new hatch, only difference being a smaller slot to accommodate new, smaller hinges.

You can have the old damaged hatch or the mold to make a new hatch for free. Only prob I'm in Boston. Could prob ship the old hatch for cheap, but the mold is heavy.

By the way, mine is a '74 SF! Not sure if their the same dimensions

[PelicanPaul]

I have one from my 72 I won't be using in the refit. Stuart FL