#1
|
|||
|
|||
Topside paint
Looking for some advice. I am going to seadek my entire deck and wanted to repaint my interior and cap first. I've used awlgrip before and it's an extensive process that I'm not looking forward to get into. I'm hoping to just be able to fair in some chips and old screw holes and paint. Any suggestions and maybe pics of finished projects would be appreciated.
Thanks again |
#2
|
|||
|
|||
You might want to take a look at Signature Finish paint. Very user friendly, repairable, and made for DIY use with no primer required; used by Capt. Chuck, DonV and others with good results. It's also the only urethane I know of that holds up underwater! Used it for bottom paint and it's held up much better than I expected! Tom Fabula can mix up any color you want.
The new paint that forum member Joel Shine is selling is another option that appears to have similar characteristics and benefits.
__________________
'72 SeaFari/150E-Tec/Hermco Bracket, owned since 1975. http://i188.photobucket.com/albums/z...Part2019-1.jpg |
Thread Tools | Search this Thread |
Display Modes | |
|
|