finished hatches for sale

[Briguy]

I have a 14x18.5 hole in the stern of my boat. Currently
have an ugly plastic hatch. Do you have anything close to
this size? I could open up the hole a few inches each way if needed.

[shine]

I have a 14x18.5 hole in the stern of my boat. Currently
have an ugly plastic hatch. Do you have anything close to
this size? I could open up the hole a few inches each way if needed.

Soon, I will have a few new sizes, the smallest one will probably work, it will require an 18" square hole. With the gutters, these fiberglass hatches require a more space.

The fellow whom I am partnering with on these hatches is working on the plugs now, so they will be available in the next few weeks (hopefully)

[Briguy]

Well you've got one order.

[shine]

A customer rebuilding a seacraft sent me these pictures of one of our hatches going into his 23, he said it fit right in without any cutting - thats lucky

[jnamowitz]

Has there been any progress or is the bow anchor hatch for the 23cc an idea yet? I have searched the Internet to all ends and can't find one that suits my needs....

[dave s]

Here's three of the large rectangular hatches installed in a 28' BHM.

[shine]

Originally Posted by jnamowitz

Has there been any progress or is the bow anchor hatch for the 23cc an idea yet? I have searched the Internet to all ends and can't find one that suits my needs....

its on the list, need to have a smaller trapezoid hatch made first, then we can make a piece to fit for hanging anchors

Here's three of the large rectangular hatches installed in a 28' BHM.

looks good, is he going to fair them in? I guess technically you dont need to, just epoxy them in the hole

[dave s]

Originally Posted by shine

looks good, is he going to fair them in? I guess technically you dont need to, just epoxy them in the hole

We're not fairing them in, since the lip of the hatches sticks up very slightly, so you don't trip on them.
We're going to add more coats of paint around them, that will build up the edge.
Besides we don't want to mess up the pretty white gel coat!

I'll be ready for some unfinished hatches for my 18' SeaCraft project soon.
Hope you have the sizes I need.

[jnamowitz]

[QUOTE=shine;241974]its on the list, need to have a smaller trapezoid hatch made first, then we can make a piece to fit for hanging anchors]
I don't really care about hanging the anchor, just to be able to set everything down in there. I don't want to buy the plastic hatch for up there.

[shine]

[QUOTE=jnamowitz;241995]

Originally Posted by shine

its on the list, need to have a smaller trapezoid hatch made first, then we can make a piece to fit for hanging anchors]
I don't really care about hanging the anchor, just to be able to set everything down in there. I don't want to buy the plastic hatch for up there.

So your just looking for a smaller trapezoid hatch?