LT'S PROJECT

[ltdan]

HOLY CRAP,,, IT FEEL'S LIKE A MILLION MICK LIGHT'S AGO THAT I WAS ON THIS THREAD.
JOHN R.,,,WAY TO GO DUDE,, AND THANK'S FOR ASKING ABOUT ME. HAVE YOU TRIED OUT THOSE
2-THIRSTY-5'S YET? I CHECKED THAT RIG OUT ONCE BEFORE,AND IT'S SOLID. THEY WANTED A TON OF CASH @ THE TIME, I'LL BET YOU GOT A GOOD DEAL,,, YES?
MY PROJECT IS GOING GREAT [img]images/icons/grin.gif[/img] . PULLED THE CAP, REMOVED ALL THE OLD CORE AND REPLACED WITH 6# HIGH DENSITY FOAM. SEPERATED THE FLOOR FROM THE STRINGER'S, REMOVED ALL THE CRAP THEY HAD IN THERE(MANY,MANY MICHELOB'S)AND REPLACED IT WITH SOME COOL STUFF I GOT FROM A BOAT BUILDER BUDDY OF MINE. THE FLOOR'S SO SOLID,NOW I'VE GOTTA WEAR SLIPPER'S OR MY FEET'LL HURT. "ARMSTRONG" WILL HAVE MY SUPER CUSTOM,WIDE BODY,EXTRA DEEP,TRICK LADDER MOUNT, BRACKET DONE NEXT WEEK [img]images/icons/grin.gif[/img] . TOONIGHT I FINISHED THE MOLD FOR MY CUSTOM ENCLOSED TRANSOM. A COMBO OF OLD SPORT FISHERMAN/TODAY'S TECH STYLE AND FABRICATION. I'LL PULL THE CAP BACK OFF THIS WEEKEND AND BUILD THE NEW PIECE ON TO IT. JEEZE I'M RAMBLIN AGAIN,,,, I'M GONNA HANG UP AND GET A FRESH BEER. MOST OF MY FREE TIME IS ON THE PROJECT,,,THAT'S WHY I HAVEN'T BEEN AROUND. THE END IS NEAR THOUGH. I'LL CATCH YA'LL LATER,,,, LT DAN

[John R]

Good Luck & Thanks man!

[Finster]

LT, your project sounds simular to mine. Where did you put the foam? Around the sides of the liner and hull?

[ocuyler]

LT DAN,

It's good to hear from you. We wern't sure if you were up to your eyeballs in 2 part epoxy or ready to take the Indiantown ICW bridge from drinking too many Michs.

It requires an excessive behavior to take a project to the depths like you, myself, and a bunch of other guys on this site. It's pretty hip, really.

As you said, "the end is near" that,s either a good sign or a suicide note.

Keep in touch. Images!

Otto

[John R]

Yeh Images - that thing that goes click & flash [img]images/icons/grin.gif[/img]

twoTHIRSTYfives? Two of 'em? Nahh - haven't tried and not certain yet if I will or not... We'll see [img]images/icons/grin.gif[/img]

[Finster]

YEH MAN! BRING IT ON! [img]images/icons/cool.gif[/img]

[Finster]

You know, all this yap'n about Mick lights got me thirsty............uummmmm, tastefull. [img]images/icons/grin.gif[/img]

[ltdan]

X-NAY ON THE HULL SIDE'S FINSTER. SOUND'S LIKE YOUR REFERING TO SPRAY FOAM. I'M TALKING ABOUT THE STUFF YOU USE TO REPLACE THE OLD WOOD CORE.
GOT A LITTLE AHEAD OF MYSELF TODAY,,,,,I DIDN'T WANT TO WAIT FOR THE WEEKEND,SO I PULLED THE CAP(AGAIN [img]images/icons/shocked.gif[/img] )AND FASTENED THE MOLD FOR THE TRANSOM CAP TO IT. GOT THE GELL COAT SPRAYED AND TWO LAYER'S OF MAT DOWN. I'LL FINISH IT TOMORROW WITH SOME 1708, 6# CORE, AND ANOTHER LAYER OF 1708. I GOTTA GET SOME PICTURE'S TOGETHER, IT'S REALLY STARTING TO LOOK COOL [img]images/icons/grin.gif[/img]
TIGHT LINE'S TO ALL,,,LT

[Mark]

SOUNDZ LIKE A SIX MICH-LIGHT JOB AT THE LEAST, GO FOR THE 12 PACK JUST IN CASE THOUGH. POST SHOTS FOR THE REST OF US TO ADMIRE-

[ocuyler]

John R,

Now that you've bought your boat, you're so mellow! Get that thing out there with those motors and see what she'll do. Come on!

Inquiring minds want to know!

Otto