#1
|
|||
|
|||
This ones different !
I saw a center console today called a Rambo Palm Beach. It was 25' to 30' and had a different hull. At the bow it was a variable deadrise like the SeaCraft but the chine was inverted. Instead of being extended at the keel and stepping back, it was inset at each step. A reverse of the SeaCraft. At the stern it had a standard deep vee hull. Has anyone heard or seen one of these. - PF
|
#2
|
|||
|
|||
Re: This ones different !
PF, I know Palm Beach has a 23 SC knock off. But I haven't seen the one you mentioned. There's a local dealer here I'll look into it.
__________________
http://lecharters.com '76 23 SC CC I/O '86 20 Aquasport 200 '98 15 Boaton Whaler Dauntless There's more but w/e |
#3
|
|||
|
|||
Re: This ones different !
__________________
Cape Marine Supply |
#4
|
|||
|
|||
Re: This ones different !
__________________
1986 Seacraft 23CC etec 250 Portland, Maine |
#5
|
|||
|
|||
Re: This ones different !
My folks next door neighbor has a rambo. It's 27' I believe, but I'm not terribly sure. Has very low freeboard a really narrow beam.
__________________
Is there anything beer can't do? |
#6
|
|||
|
|||
Re: This ones different !
Great job! That's it. Just ask the SeaCraft brain trust! If you get a chance to check out the hull, do it. It's a real strange design. -PF [img]/images/graemlins/wink.gif[/img]
|
#7
|
|||
|
|||
Re: This ones different !
Yep thats a rambo 27, there made localy (somewhere in south florida, not sure where exactly) and are very popular down here allot of the commercial live bait boats are rambos so its gotta say something about the design, yes it is very narrow and usually run with a single engine but allot down here have twin 150's, 175's...
__________________
no falls, no balls |
Thread Tools | Search this Thread |
Display Modes | |
|
|