Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > General

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 08-20-2006, 05:02 PM
tri5 tri5 is offline
Member
 
Join Date: Aug 2006
Location: bristol county m.a.
Posts: 30
Default first seatrial 23'sceptre

hi guys splashed this weekend not to good the old 200 rude ran ok on the hose but fell on her face when you put a load on her.think its runing to fat burning alot of fuel 4gal at the dock.going to pull the carbs apart see whats going on.also took on a lot of water threw the scupers.going to soak them in oil or buy new ones.they just dont seem to seal up to good. stern bilge pump was not working due to bad wire.was woking graet in the yard murphy strikes agin.
Reply With Quote
  #2  
Old 08-20-2006, 08:59 PM
joema joema is offline
Senior Member
 
Join Date: Apr 2006
Posts: 102
Default Re: first seatrial 23'sceptre

hang in there we have all been there took a while for me but its all worth it
Reply With Quote
  #3  
Old 08-22-2006, 12:51 AM
eggsuckindog eggsuckindog is offline
Senior Member
 
Join Date: Mar 2003
Location: Tampa
Posts: 2,354
Default Re: first seatrial 23'sceptre

Liquid Electrical tape is cheap and sure helps keep the wiring going along time. Ya the rubber gets old too, is it an a carbed Rude? may have a float stuck, I do have a dealer down here that is SC fan that will give some help on the phone if I ask him. He's really good at give you things to do to help figure stuff out.
__________________
Any way you measure it - dumbass is expensive
Reply With Quote
  #4  
Old 08-22-2006, 03:35 PM
Briguy Briguy is offline
Senior Member
 
Join Date: Apr 2002
Location: Sarasota, Fl
Posts: 976
Default Re: first seatrial 23'sceptre

Bilge pump?

GET TWO BILGE PUMPS!!!!!!
__________________
Capt. Brian

Reply With Quote
  #5  
Old 08-22-2006, 08:38 PM
tri5 tri5 is offline
Member
 
Join Date: Aug 2006
Location: bristol county m.a.
Posts: 30
Default Re: first seatrial 23'sceptre

Quote:
Liquid Electrical tape is cheap and sure helps keep the wiring going along time. Ya the rubber gets old too, is it an a carbed Rude? may have a float stuck, I do have a dealer down here that is SC fan that will give some help on the phone if I ask him. He's really good at give you things to do to help figure stuff out.
thanks for the reply rude is a late 70,s going to pull and clean carbs befor i start to pick brains or be for i lose intrest.motor was given to me by a buddy for seatrial and i just dont want to melt a piston on him.but i'll see how it go's . good tip on wiring thanks
Reply With Quote
  #6  
Old 08-22-2006, 08:47 PM
tri5 tri5 is offline
Member
 
Join Date: Aug 2006
Location: bristol county m.a.
Posts: 30
Default Re: first seatrial 23'sceptre

do have two pumps 1 at the stern 1 mid ship befor fuel tank.going to rewire them thanks for the reply
Reply With Quote
  #7  
Old 08-24-2006, 08:25 PM
peterb peterb is offline
Senior Member
 
Join Date: Dec 2004
Location: Montclair, Sandy Hook & Highbar Harbor, NJ
Posts: 1,148
Default Re: first seatrial 23'sceptre

Also, I plug my scuppers when i am riding in the boat, and rmeove them when the boat is tied up
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:57 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft