|
|
#1
11-02-2006, 04:45 PM
|
|||
|
|||
epoxy resin source
Someone posted a source for 3 and 5 gallon kits...I can't recall but I think it was around $250 for the 3 gallon kit...and I think it was American something.....I must have read it after midnight and of course now I can't seem to find the thread. I'm at the supply ordering point...could you repost here....thanks.... 
|
|
#2
11-02-2006, 04:56 PM
|
|||
|
|||
|
Re: epoxy resin source
I get most of the epoxy that I use from Fiberglass coatsing Inc... http://www.fgci.com
Their 2:1 epoxy 3 gallon kit is about $100 Their 3:1, 4:1 and 5:1 epoxy 5 gallon kits are about $175 Its hard to beat those prices for epoxy resin. Their epoxy products are very good and boast extremely good physical properties when compared to others. The 4:1 and 5:1 epoxies, however, tend to have very short working times. But during this time of the year their working times are a little better.
|
|
#3
11-02-2006, 05:27 PM
|
|||
|
|||
|
Re: epoxy resin source
Ringleader,
Are you sure about the 2:1 expoxy being $ 100 for a 3 gal. kit? I just bought one last week and it was right at $240. If its $100 they sure saw me coming , because I have purchased about 40 gals. over the past 1 1/2 yrs. and it has been pretty close to the $240.
|
|
#5
11-02-2006, 06:02 PM
|
|||
|
|||
|
Re: epoxy resin source
I'm sure the prices have gone up since my catalog is about 3 years old now. I made a big order a few weeks back, but I didn't look at the prices. I figured the less that I knew, the better off I would be. Deffinitely don't want the wife to see the prices for resin and glass as she is already pizzed off at me for buying another project boat.
I can look to see what the current prices that I paid were.
|
|
#6
11-02-2006, 06:07 PM
|
|||
|
|||
|
Re: epoxy resin source
http://www.shopmaninc.com/
I have had good luck using US Composites but there is a whole host of discount suppliers of resin and cloth(s).
__________________
__________________________________________________ ________________ 1974 23SF
|
|
#7
11-02-2006, 09:25 PM
|
|||
|
|||
|
Re: epoxy resin source
You guys should check out US Composites. I have been buying a 6.6 gallon kit from them for 209.00 plus shipping and I love the stuff. It is 3:1.
www.uscomposites.com
__________________
If it isn't deer season I'd rather be in a SEACRAFT
|
|
#8
11-02-2006, 10:14 PM
|
|||
|
|||
|
Re: epoxy resin source
I've been using RAKA epoxy and find it very easy to use. 2:1 ratio. The six gallon kit - 4 gallons resin, 1 gallon fast cure hardner and 1 gallon slow cure hardner is about $250. Do a search for RAKA epoxy and you will find their site.
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
