Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > General

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 07-02-2009, 05:30 PM
BillPutney BillPutney is offline
Senior Member
 
Join Date: Oct 2005
Location: Eastern North Carolina
Posts: 141
Default oil ratio

What is the correct oil/gas ratio for a 91 70 hp. Mercury outboard. The boat belongs to a friend that just bought it from a mechanic who told him to put double the normal amount of oil for the first tank and 1.5 times the amount on the second tank during break in period.
Reply With Quote
  #2  
Old 07-02-2009, 08:18 PM
bridgeman bridgeman is offline
Senior Member
 
Join Date: Jul 2008
Posts: 122
Default Re: oil ratio

If the oil injection is hooked up you'll need to pre-mix 50:1. I'd run it that way for a 20 hrs or so, won't hurt anything other than fowl the plugs if you idle for extended periods.
Reply With Quote
  #3  
Old 07-03-2009, 03:26 PM
eggsuckindog eggsuckindog is offline
Senior Member
 
Join Date: Mar 2003
Location: Tampa
Posts: 2,354
Default Re: oil ratio

Normal 50/1 as mentioned if oil injected judt put another 50/1 in the tank - if not then run it at 25/1 premixed
__________________
Any way you measure it - dumbass is expensive
Reply With Quote
  #4  
Old 07-03-2009, 08:16 PM
BillPutney BillPutney is offline
Senior Member
 
Join Date: Oct 2005
Location: Eastern North Carolina
Posts: 141
Default Re: oil ratio

I told him to add 50 oz. to 10 gals for the first go round.That should be close enough don't you think ?
Reply With Quote
  #5  
Old 07-03-2009, 08:17 PM
BillPutney BillPutney is offline
Senior Member
 
Join Date: Oct 2005
Location: Eastern North Carolina
Posts: 141
Default Re: oil ratio

The motor ie not an oil injected model
Reply With Quote
  #6  
Old 07-04-2009, 08:08 AM
bridgeman bridgeman is offline
Senior Member
 
Join Date: Jul 2008
Posts: 122
Default Re: oil ratio

If the motor is not oil injected you need to run 25:1 initially eg. 1 gallon of oil added to 25 gallons of gas for at least the first 10 hours, I'd go 20 hrs and lean it up after that.
Reply With Quote
  #7  
Old 07-04-2009, 09:20 AM
BillPutney BillPutney is offline
Senior Member
 
Join Date: Oct 2005
Location: Eastern North Carolina
Posts: 141
Default Re: oil ratio

If my math is right the 50 oz. to 10 gals works out to 1 gal. oil in 25.6 gals. gas . Glad you confirmed that for me.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:51 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft