#1
|
|||
|
|||
Outrigger question for east coast guys
I'm get ready to sell a pair Lee 15' riggers and elbows - 1 1/8" bases - fully rigged and only used twice - trying to get handle on price
__________________
Any way you measure it - dumbass is expensive Last edited by eggsuckindog; 01-07-2013 at 01:41 PM. |
#2
|
|||
|
|||
I guess I would do a Miami C/L search and see what comes up.
__________________
[SIGPIC][/SIGPIC] "If You Done It...It Ain't Braggin" my rebuild thread: http://www.classicseacraft.com/commu...ad.php?t=18594 |
#3
|
|||
|
|||
Hey Dog, I'm assuming these are the 1 1/8" gunnel mount? I'm thinking used would be in the $500 range, maybe a bit more because they are Lee's. I'll keep my eye out for ya.
I wish I had bought the Lee's t-top mount bases instead of the Taco, oh well 20/20 hind site is wonderful. |
#4
|
|||
|
|||
What's wrong with the taco mounts???? I bought a set for a price I could not refuse
|
#5
|
|||
|
|||
You are correct I think they are 1 1/8, which made finding some for my gunnel bases hard - I did a new set in the wrappers
I'm not selling the bases just the elbows, they were in when I bought and don't want to pull and cover them. So $500 may he high - is that correct, they hard to find though and new bases are expensive
__________________
Any way you measure it - dumbass is expensive Last edited by eggsuckindog; 01-06-2013 at 08:16 PM. |
#6
|
|||
|
|||
Evan, After a few years they get loose and sloppy. They are nice units, don't get me wrong, however If I had it to do over I would go with the Lee's mounts. They are very simple, very well made and over built. Heck, in my world all I need is an "in position"and an "out trolling position" plus only two adjustments for the outrigger's angle...flat and up to troll. I don't really need all the adjustments I thought I just had to have when I bought the Tacos. Oh yeah, I have the Taco poles and have had to send them back once for repairs, at no cost except shipping, after the repairs they still work perfect. Good luck!
|
#7
|
|||
|
|||
Hey Dixon, after you sell yours, I've got a set of the same Lee's outriggers (no base or arms) I'll sell cheapo. That's if I can still get them apart to bring home.
|
#8
|
|||
|
|||
I still have a pair of tigress 1 1/18 with lee elbows...way too much for the cap.
May have a mirage flying your way. Cheers, GFS |
#9
|
|||
|
|||
I put them up for 175 on CL S Fla - they work great for gunnel mounts with no major mods needed they are so light
__________________
Any way you measure it - dumbass is expensive |
#10
|
|||
|
|||
Any chance they could be shipped to the north east? Or is anyone planning a trip to Tampa before tuna season up here?
|
Thread Tools | Search this Thread |
Display Modes | |
|
|