Free fiberglass parts

[dave s]

If anyone wants any of the fiberglass parts cutout from my 18SF project, they are welcome to have them.
I have the boxes from the rear corners, underdeck livewell, front fish box and raised bow platform, fuel tank tub and deck panel.
Also have the fuel tank, 60x24x8"; has some corrosion and three small holes on top- free.

Probably will get rid of console too and missc. hatches.

Have a good condition 14" Wema sender $20.
Yamaha dual engine fuse guage harness pn 6Y5-83553-NO-00 $15.
Yamaha dual engine wire harness assembly pn 704-82509-10-00 $65.

If anybody has, I need the main aluminum bow for a Bimini top- it measures 84"wide x 72" tall, 7/8" diameter.

[gofastsandman]

Originally Posted by dave s

If anyone wants any of the fiberglass parts cutout from my 18SF project, they are welcome to have them.
I have the boxes from the rear corners, underdeck livewell, front fish box and raised bow platform, fuel tank tub and deck panel.
Also have the fuel tank, 60x24x8"; has some corrosion and three small holes on top.
Probably will get rid of console too and missc. hatches.

Have a good condition 14" Wema sender $20.
Yamaha dual engine fuse guage harness pn 6Y5-83553-NO-00 $15.
Yamaha dual engine wire harness assembly pn 704-82509-10-00 $65.

I want the transom boxes please! Oh and the starboard transom hatch please.

Yipee. Goin fishin. Happy Pops day everyone.

Oh, I`m off to see the wizard...

GFS

[dave s]

Gfs, the boxes are yours.
I have the starboard hatches for the cutouts in the boxes but no hatch for the splashwell, if that's what you're talking about.

I do have a starboard piece to raise up the transom cutout.
I think the previous owner used it as a splash guard along with a motor bracket.

[gofastsandman]

Originally Posted by dave s

Gfs, the boxes are yours.
I have the starboard hatches for the cutouts in the boxes but no hatch for the splashwell, if that's what you're talking about.

I do have a starboard piece to raise up the transom cutout.
I think the previous owner used it as a splash guard along with a motor bracket.

I have the teak splashwell gate. I worded this poorly. Turn off your decoder rings. I can hear y`all laughing now.

I was looking for the right side transom box lid/hatch.

I might want the forward fish box for the other boat. Please. That thing has no storage.

Cheers,
Us

[dave s]

The tops of the transom boxes are glassed in, so no lid/hatches.
I'm guessing the two square black starboard hatches I have are for the vertical bulkhead cutouts.
If you need pics let me know.

[jorgeinmiami]

Im looking for the vertical left rear hatch and the forward anchor locker if they fit on a 20MA

I'm 2nd in line

Pics would be nice

[dave s]

I think the 18 has only the one hatch up front on the raised deck box; it's 27" wide and 24" long; same size as the rear fish box hatch.
Hard to tell on this boat, since a lot was already cut out.

The MA has one hatch also but don't know if they're the same size.

If Gfs doesn't want the vertical hatches, you can have them.

[jorgeinmiami]

I looked at the pics of a few 18's and it won't fit, but thanks

[dave s]

Transom boxes- two sections and vertical hatches.

[dave s]

Front raised box with fishbox/liner.