Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 11-11-2014, 09:23 AM
Daniel sf Daniel sf is offline
Recovered
 
Join Date: Feb 2015
Posts: 26
Default Finally ready to start work on the 23'

Bought this 23' SeaCraft three years ago knowing the deck needed to be replaced. We used it the last three seasons but now it's ready for the new deck. This is the first time I take on a project like this so if anyone has any advice, it would be appreciated.
Attached Images
 
Reply With Quote
  #2  
Old 11-11-2014, 10:30 AM
Daniel sf Daniel sf is offline
Recovered
 
Join Date: Feb 2015
Posts: 26
Default

Here is what I've done so far.

I took the deck out and noticed some holes that where cut out of the stringers from the previous owner.the tank was replaced by him 7 years ago, but the guy that he had put the deck in did a real bad job.

I cut the top of the stringer and saw there was water in them so I started digging out the foam. I also pulled out the tank because the wood under the tank was rotting.
Attached Images
 
Reply With Quote
  #3  
Old 11-11-2014, 11:00 AM
flyingfrizzle flyingfrizzle is offline
Senior Member
 
Join Date: Sep 2012
Location: Eastern NC
Posts: 1,653
Default

Quote:
Originally Posted by Daniel sf View Post
Here is what I've done so far.

I took the deck out and noticed some holes that where cut out of the stringers from the previous owner.the tank was replaced by him 7 years ago, but the guy that he had put the deck in did a real bad job.

I cut the top of the stringer and saw there was water in them so I started digging out the foam. I also pulled out the tank because the wood under the tank was rotting.
The stringers had holes drilled in them from the factory so they could pour the expanding foam in them. They didn't take the time to cover them once poured. There may have been more done by the previous owner but some were originally done on day one.
__________________
Current SeaCraft projects:
68 27' SeaCraft Race boat
71 20' SeaCraft CC sf
73 23' SeaCraft CC sf
74 20' SeaCraft Sceptre
74 20' SeaCraft CC sf
Reply With Quote
  #4  
Old 11-11-2014, 11:01 AM
Daniel sf Daniel sf is offline
Recovered
 
Join Date: Feb 2015
Posts: 26
Default

Pics
Attached Images
 
Reply With Quote
  #5  
Old 11-11-2014, 11:04 AM
Daniel sf Daniel sf is offline
Recovered
 
Join Date: Feb 2015
Posts: 26
Default

Yeah I saw the holes you are talking about . But the holes where cut out in squares rather than drilled with a hole saw.
Reply With Quote
  #6  
Old 11-11-2014, 11:09 AM
Daniel sf Daniel sf is offline
Recovered
 
Join Date: Feb 2015
Posts: 26
Default

Pics
Attached Images
 
Reply With Quote
  #7  
Old 11-11-2014, 11:10 AM
Daniel sf Daniel sf is offline
Recovered
 
Join Date: Feb 2015
Posts: 26
Default

Pic
Attached Images
 
Reply With Quote
  #8  
Old 11-11-2014, 11:13 AM
Daniel sf Daniel sf is offline
Recovered
 
Join Date: Feb 2015
Posts: 26
Default

P i c
Attached Images
 
Reply With Quote
  #9  
Old 11-11-2014, 11:14 AM
Daniel sf Daniel sf is offline
Recovered
 
Join Date: Feb 2015
Posts: 26
Default

Pic s
Attached Images
 
Reply With Quote
  #10  
Old 11-11-2014, 11:15 AM
Daniel sf Daniel sf is offline
Recovered
 
Join Date: Feb 2015
Posts: 26
Default

P
Attached Images
 
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:29 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft