I'm almost finished with my 20

[bibijawa]

After almost a year and a half of working on my 89 20sf, I finally just picked it up from the painter.

[TomParis]

looks great!

[Bikecop1]

Do you have any before pictures?

[boo4209]

It looks really good!

[waterboy]

That looks awesome!

[Chrismacholz]

Love the color. Doesn't look quite as bright as a sea foam. What did they paint it with?

[Briguy]

Very clean. Nice added spray rail. Details?
Power?

[bibijawa]

Thanks for the complements. The hull is Awlgrip aquamist and off white inside and bottom. I will post more pictures soon.

[bibijawa]

Originally Posted by Briguy

Very clean. Nice added spray rail. Details?
Power?

For now I'll put the old motor on, a 2000 Yamaha 150 hpdi. But I hope to buy a new Suzuki 140 within the next 6 months.

[bibijawa]

It started out as a transom replacement but then I figured might as well fix everything now. I replaced the transom with 1.5" coosa bluewater 26. The deck was pretty solid, when I cut the skin off in a couple of places to check the wood I found the previous owner had replaced the plywood with foam board. I also replaced a section of the core at the bow and front deck with coosa. Bought a new and smaller 53 gallon fuel tank. Tank will now be installed on 6 solid 1/2" thick fiberglass slats and as far forward as possible. Cut out the deck well for bilge access and storage. Raised the transom up to 26.5". All work was done with us composites epoxy.